Multec-M (14 SE / C 14 SE / C 16 SE) F2: TROUBLE CODE
| Trouble Code | Information Sensor Cause of Fault | Remedy in F0:DATA LIST No. | Trouble Code Storage when ... |
|---|---|---|---|
| 51 | REPLACE | ||
| ECU OR PROM | - | · Ignition ON |
· Engine OFF
If trouble code 51 was recognized, carry out the following instructions:
· Disconnect battery;
· Reconnect battery;
· Delete trouble code and read out trouble codes again;
· If trouble code 51 occurs again: replace program memory;
· Delete trouble code again and read out trouble codes;
· If trouble code 51 still occurs: replace control unit.
On fault recognition, the vehicle does not start.