MULTEC Central Fuel Injection (X 12 SZ / X 16 SZ) F2:TROUBLE CODE TABLE
Trouble
| Code |
Information Sensor
| Cause of Fault | Remedy in |
F0:DATA LIST
| No. | |
|---|---|
| Trouble Code Storage when ... | |
| Remarks | |
| 51 | REPLACE |
ECU OR PROM
| - | · Ignition ON |
· Engine OFF
If trouble code 51 was recognized, carry out the following instructions:
· Disconnect battery;
· Reconnect battery;
· Delete trouble code and read out trouble codes again;
· If trouble code 51 occurs again: replace program memory;
· Delete trouble code again and read out trouble codes;
· If trouble code 51 still occurs: replace control unit.
On fault recognition, the vehicle does not start.