Table 2, Multec (X 12 SZ / X 16 SZ) F2: TROUBLE CODE
Trouble
| Code | Information Sensor | ||
|---|---|---|---|
| Cause of Fault | Remedy in F0: | ||
| DATA LIST | Trouble Code Storage when... | ||
| 35 | IDLE AIR CONTROL | 07 | · Engine running at idle speed |
· Vehicle speed less than 1 km / h (0.6 mph)
· Coolant temperature higher than 80° C / 176 F
· Throttle valve aperture less than 2 %
· Following trouble codes not stored: 21, 22, 24
· Nominal idle speed is not maintained; deviation is greater than 150 rpm
· The above conditions must be fulfilled for at least 20 s
If the speed sensor has malfunctioned and trouble code 24 has not yet been recognized, trouble code 35 may be set under certain circumstances.