Multec- S X 14 XE / X 16 XE(L) F2:TROUBLE CODES
| Trouble Code | Information Sensor Cause of Fault | Remedy in F0:DATA LIST No. | Trouble Code Storage when... |
|---|---|---|---|
| 76 | CONTINUOUS TORQUE CONTROL | 48 | · The fault is recognised by the control unit if the torque control voltage signal does not indicate shifting for longer than 2.5 s |
· Above condition must be fulfilled at least 5 times
Effects:
· The engine telltale is ON
| · The ignition is not retarded during AT shifting (rough shifting) |