Multec-S X 14 XE / X 16 XE (L)5 F2:TROUBLE CODE TABLE
| Trouble Code | Information Sensor Cause of Fault | Remedy in F0:DATA LIST No. | Trouble Code Storage when ... |
|---|---|---|---|
| 16 | KNOCK SIGNAL CIRCUIT | 15 | · Knock sensor signal (average value) lower than 1.25 V |
or
Knock sensor signal (average value) higher than 3.75 V
· Above condition must be fulfilled for at least 4 s
Replacement value:
· RON 91 octane characteristic curve
Effects:
· Knock control is switched off
Note:
| Activation of the RON 91 octane characteristic curve guarantees (by retarding firing angle) that the engine is protected against knocking combustion. |