MULTEC Central Fuel Injection (X 12 SZ / X 16 SZ) F2:TROUBLE CODE TABLE
Trouble
| Code |
Information Sensor
| Cause of Fault | Remedy in |
F0:DATA LIST
| No. | |
|---|---|
| Trouble Code Storage when ... | |
| Remarks | |
| 19 | INCORRECT RPM |
SIGNAL
| 05 | · If, when the engine starts, within 3 seconds, the reference signal is not present and the battery voltage has decreased by at least 1 V and the intake manifold pressure has decreased by at least 60 hPa, the control unit recognizes an engine start although the reference signal is missing. Fault is set. |
or
| · If more than 4 synchronization pulses are missing per 64 engine revolutions when the engine is running, the fault is set. |