MULTEC Central Fuel Injection (12 NZ, C 12 NZ, C 14 NZ) F2:TROUBLE CODE TABLE
Trouble
| Code |
Information Sensor
| Cause of Fault | Remedy in |
F0:DATA LIST
| No. | |
|---|---|
| Trouble Code Storage when ... | |
| Remarks | |
| 35 | IDLE |
AIR CONTROL
| 06 | · Engine running at idle speed |
· Vehicle speed less than 1 km/h (0.6 mph)
· Coolant temperature higher than 75 °C/167 °F
· Throttle valve aperture less than 2 %
· Following trouble codes not stored: 21, 22, 24
· Nominal idle speed is not maintained; the deviation
is greater than 75 rpm
· The above conditions must be fulfilled for at least 19 s
Only for control units up to Model Year 91: C 14 NZ
· The above conditions must be fulfilled for at least 1 s
Only for control units as of Model Year 92: C 12 NZ,
C 14 NZ
If the speed sensor has malfunctioned and trouble code 24 has not yet been recognized, trouble code 35 may be set under certain circumstances.