Table 2, Multec-S (C 16 XE) F2: TROUBLE CODE
Trouble
| Code | Information Sensor | ||
|---|---|---|---|
| Cause of Fault | Remedy in F0: | ||
| DATA LIST | Trouble Code Storage when... | ||
| 55 | REPLACE ECU | - | · Ignition ON |
· Engine °FF
If trouble code 55 has been recognized, proceed as follows:
Disconnect battery
Reconnect battery
Erase trouble code and read trouble code again
If trouble code 55 reappears: replace control unit
In case of fault recognition the vehicle does not start