C-34, Blinkcode Request Circuit
| C-34, Blinkcode Request Circuit |
|---|
| Test | Work Order Description | Nominal Value |
| T01 | Check: Short to Ground/Interruption of Signal Circuit | |
| Ignition ON Engine OFF Measure voltage between the following terminals: X13 Diagnostic Link Wiring Harness Connector Terminal 6 & Ground | greater than 11 V |
| Yes: T02 | No: E03 |
| T02 | Check: Short to Voltage of Signal Circuit | |
| Ignition OFF Measure voltage between the following terminals: X13 Diagnostic Link Wiring Harness Connector Terminal 6 & Ground | less than 0.2 V |
| Yes: E01 | No: E02 |
| C-34, Blinkcode Request Circuit |
|---|
| Result | Cause Of Fault |
| E01 | If programming/nominal value is okay and system is still faulty the following component is defective: H30 Telltale - Engine |
| |
| E02 | Short circuit to voltage between: X13 Diagnostic Link Terminal 6 & K57 Control Unit - Multec Wiring Harness Connector Terminal B9 or Defective component: K57 Control Unit - Multec |
| |
| E03 | Short circuit to ground/interruption of circuit between: K57 Control Unit - Multec Wiring Harness Connector Terminal B9 & X13 Diagnostic Link Wiring Harness Connector Terminal 6 or Defective component: K57 Control Unit - Multec |
| |
