Multec-S X 14 XE / X 16 XE (L)5 F2:TROUBLE CODE TABLE
| Trouble Code | Information Sensor Cause of Fault | Remedy in F0:DATA LIST No. | Trouble Code Storage when ... |
|---|---|---|---|
| 47 | LINEAR EGR POSITION | 24, 25 | · Self-test 1 of exhaust gas recirculation system (position measurement valve piston for exhaust gas recirculation valve closed): |
The fault is recognised by the control unit if the measured exhaust gas recirculation valve aperture is less than 2 % for longer than 2 s.
or
· Self-test 2 of exhaust gas recirculation system (position measurement valve piston for exhaust gas recirculation valve open):
The control unit compares the nominal and actual values of the exhaust gas recirculation valve aperture for 9.5 s after self-test 1. The fault is stored by the control unit if a deviation of more than 12.5 % is recognised for longer than 2 s (at an exhaust gas recirculation valve aperture smaller than 80 %).
Effects:
| · The exhaust gas recirculation system is switched off |