Multec-S X 14 XE / X 16 XE (L)5 F2:TROUBLE CODE TABLE
| Trouble Code | Information Sensor Cause of Fault | Remedy in F0:DATA LIST No. | Trouble Code Storage when ... |
|---|---|---|---|
| 35 | IDLE AIR CONTROL | 42, 43 | · Engine running at idle speed |
· System is not in TECH 1 diagnostic mode
· Coolant temperature higher than 80 °C/ 176 °F
· Battery voltage is in range from 8 to 16 volts
· Following trouble codes not stored: 21, 22, 24
· Idle speed is not maintained; deviation is greater than 125 rpm
· Above conditions must be fulfilled for at least 20 s
Note:
| If the speed sensor has malfunctioned and trouble code 24 has not yet been recognised, trouble code 35 may be set under certain conditions. |