Multec-M (14 SE / C 14 SE / C 16 SE) F0:DATA LIST
| No. | TECH 1 Display | Conditions for Checking | Nominal Value | Trouble Codes | Terminal |
|---|---|---|---|---|---|
| 25 | CLEAR FLOOD MODE | Ignition ON |
Engine OFF
Throttle valve completely CLOSED (accelerator pedal in idle position)
Throttle valve completely OPEN (accelerator pedal completely depressed)
INACTIVE
ACTIVE
| - | - |
The lean mixture for starting is an internal value of the control unit. Lean mixture for starting must not be checked when the engine is running.
| Trouble-shooting: | Nominal Value: | Cause of Fault: |
|---|---|---|
| (If nominal value is not attained) |
· In the event of a fault:
| · carry out test step 06 |