Table 2, Multec (X 12 SZ / X 16 SZ) F2: TROUBLE CODE
Trouble
| Code | Information Sensor | ||
|---|---|---|---|
| Cause of Fault | Remedy in F0: | ||
| DATA LIST | Trouble Code Storage when... | ||
| 24 | NO VEHICLE SPEED SIGNAL | 23 | · Engine running in engine speed range 1000 to 5000 rpm |
· Intake manifold absolute pressure less than 240 hPa (deceleration, e. g. possible in 4th gear from 120 km / h (75 mph) downwards)
· Following trouble codes not stored: 21, 22, 33, 34.
· Incorrect signal from speed sensor.
· Vehicle speed lower than 6 km / h (4 mph)
· Above conditions must be fulfilled for at least 6 s.
Note:
If the display "R - D - 2 - 1 12V " does not appear in test step 24 of the F0: DATA LIST for manual transmissions, trouble code 24 cannot be set (see test step 17 of the F0: DATA LIST).