MULTEC Central Fuel Injection (12 NZ, C 12 NZ, C 14 NZ) F2:TROUBLE CODE TABLE
Trouble
| Code |
Information Sensor
| Cause of Fault | Remedy in |
F0:DATA LIST
| No. | |
|---|---|
| Trouble Code Storage when ... | |
| Remarks | |
| 55 | REPLACE |
ECU
| - | · Ignition ON |
· Engine OFF
If trouble code 55 was recognized, carry out the following instructions:
· Disconnect battery;
· Reconnect battery;
· Delete trouble code and read out trouble codes again;
· If trouble code 55 still occurs; replace control unit;
On fault recognition, the vehicle does not start.