Multec- S X 14 XE / X 16 XE (L) F0:DATA LIST
| No. | TECH 1 Display | Conditions for Checking | Nominal Value | Trouble Codes | Terminal |
|---|---|---|---|---|---|
| 39 | IDLE ADJUST P- N | Vehicles with AT: |
Ignition ON
Engine running at idle speed, operating temperature
| - | |||
|---|---|---|---|
| Nominal idle speed for selector lever position "P" and "N" has not been changed (basic setting after control unit reset) | |||
| INACTIVE | |||
| Nominal idle speed for selector lever position "P" and "N" has been programmed. | ACTIVE | ||
| Notes on Trouble-shooting: | Nominal Value: | Cause of fault: |
(If nominal value is not attained)
Not at start of production MY '95
| · Check according to data list no. 38, IDLE ADJUST P- N |