Multec - S (C 16 XE) F0:DATA LIST
| No. | TECH 1 Display | Conditions for Checking | Nominal Value | Trouble Codes | Terminal |
|---|---|---|---|---|---|
| 38 | DIAG. REQUEST | Ignition ON | INACTIVE 12 V | - | F 7 |
| Trouble - shooting: | Nominal Value: | Cause of Fault: |
(If nominal value is not attained)
· Ignition OFF
· Measure voltage:
from: diagnostic plug Ter. "B"
to: ground
· Ignition ON
| INACTIVE 12 V | |
|---|---|
| greater than 10 volts | · Short circuit in wiring harness |
from: diagnostic excitation lead "B" in diagnostic plug
to: ground
· Carry out test according to Table 1