Multec-M (14 SE / C 14 SE / C 16 SE) F0:DATA LIST
| No. | TECH 1 Display | Conditions for Checking | Nominal Value | Trouble Codes | Terminal |
|---|---|---|---|---|---|
| 02 | RON CODING | Ignition ON |
Engine running at idle speed, operating temperature
Data is only taken over after ignition ON
0.22 kW 95 octane
(0.47 kW 98 octane)
| - | D 11/D 2 | ||
|---|---|---|---|
| Trouble-shooting: | Nominal Value: | Cause of Fault: | |
| (If nominal value is not attained) |
· Ignition OFF
· Using multimeter, measure voltage:
from: octane number plug X 15 Ter. A
to: octane number plug X 15 Ter. B
and
from: octane number plug X 15 Ter. B
to: octane number plug X 15 Ter. C
A and B 220 W
| B and C 470 W | · Octane number plug X 15 defective |
· Ignition ON
· Measure voltage:
from: wiring harness plug X 15 Ter. A brown/blue
to: ground
4.9 to 5.1 volts
| · Lead interruption |
from: wiring harness plug X 15 Ter. A
to: control unit K 57/K 91 Ter. D 11
· Ignition OFF
· Using multimeter, measure voltage:
from: wiring harness plug X 15 Ter. B brown
to: control unit K 57/K 91 Ter. D 2
Passage
(less than 3 W)
· Lead interruption
from: wiring harness plug X 15 Ter. B brown
to: control unit K 57/K 91 Ter. D 2