Multec- S X 14 XE / X 16 XE (L) F0:DATA LIST
| No. | TECH 1 Display | Conditions for Checking | Nominal Value | Trouble Codes | Terminal |
|---|---|---|---|---|---|
| 41 | IDLE ADJ. DRIVE | Vehicles with AT: |
Ignition ON
| Engine running at idle speed, operating temperature | - | ||
|---|---|---|---|
| Nominal idle speed for selector lever position "R", "D", "3", "2", and "1" has not been altered (basic setting after control unit reset) | |||
| INACTIVE | |||
| Nominal idle speed for selector lever position "R", "D", "3", "2", and "1" has been programmed. | ACTIVE | ||
| Notes on Trouble-shooting: | Nominal Value: | Cause of fault: |
(If nominal value is not attained)
Not at start of production MY '95
| · Remedy according to data list no. 40, DES. IDLE DRIVE |