Multec (X 12 SZ / X 16 SZ) F0: DATA LIST
| No. | TECH 1 Display | Conditions for Checking | Nominal Value | Trouble Codes | Terminal |
|---|---|---|---|---|---|
| 37 | SPARK TABLE 95 | Engine running at idle speed, operating temperature | |||
| INACTIVE | |||||
| ACTIVE | 18 | - | |||
| Note: |
If fuel of 95 octane is used, the TECH 1 display ACTIVE is correct
See F0: DATA LIST No.: 25, 27, 28, 29, 30
| If test steps 37 + 38 are INACTIVE, fuel with 98 octane must be used. | ||
|---|---|---|
| Trouble - shooting: | Nominal Value: | Cause of Fault: |
(If nominal value is not attained)
· Customer must ensure that the vehicle is tanked with 95 octane fuel.
· Test drive (approx. 5 min. )
test step 37
| test step 38 | INACTIVE |
|---|---|
| ACTIVE | · Control unit defective. |
| · Program memory defective. |