Table 2, Multec-S (C 16 XE) F2: TROUBLE CODE
Trouble
| Code | Information Sensor | ||
|---|---|---|---|
| Cause of Fault | Remedy in F0: | ||
| DATA LIST | Trouble Code Storage when... | ||
| 28 | FUEL PUMP RELAY CONTACT PROBLEM | 10, 21, 22,26, 36 | · Engine not running |
· Fuel pump relay has switched
· Following trouble codes are not stored: 19,25,29,32,81.
· Final stage diagnosis in control unit:
· Incorrect voltage condition recognized for 1.6 s
If trouble code 28 has been recognized, the system telltale is switched on.