Replace Ribbed V-Belt Tensioner Opel Vectra C

Remove

1. 1. Raise vehicle by its entire height
2. 2. Remove lower engine compartment cover and right-hand engine splash guard if present
3. 3. Detach ribbed V-belt
4. 4. Remove ribbed V-belt tensioner • Remove bolt (1)

Note. The tensioner remains locked with KM-6349 (2)

Install

5. 5. Clean thread on ribbed V-belt tensioner
6. 6. Install ribbed V-belt tensioner • Tighten bolt 50 Nm – Use new bolt.
7. 7. Install ribbed V-belt
8. 8. Install lower engine compartment cover and right-hand engine splash guard if present
9. 9. Lower vehicle by its entire height