Home/Opel/Vectra/Opel Vectra C (2002-2008)/Repair manual/DOHC Petrol Engine/Replace Front Engine Damping Block

Contents

Wiring diagrams Section: DOHC Petrol Engine

All sections

Replace Front Engine Damping Block Opel Vectra C

DOHC Petrol Engine 1 illustration

Remove

1. Open bonnet
2. Disconnect battery.
3. Raise vehicle by its entire height
4. Remove front engine damping block (1) • Unscrew 2x bolt (2) • Remove screwed connection (2)

Replace Front Engine Damping Block

Install

5. Install front engine damping block • Tighten 2x bolt 80 Nm • Tighten screwed joint 80 Nm
6. Lower vehicle by its entire height
7. Connect battery.
8. Program volatile memories
9. Close bonnet