Manual sections
Wiring diagrams- ABS
- ABS 430
- ABS 5.3
- ABS 5.3/TC/ESP
- ABS 5/TC, ABS 5.3/TC
- ABS Mk20i
- Air Conditioning
- Airbag
- Anti-Theft Warning System-M
- Automatic Transmission Front Wheel Drive
- Battery
- Board Computer
- Body Equipment
- Brake Hydraulics, Brake Lines
- Brakes
- CAN Bus
- Car Level Control
- Central Door Locking System
- Central Locking with Atws (Electronic)
- Check Control
- Clutch
- Clutch and Transmission
- Communication / Navigation
- Continuously Variable Transmission (Cvt) Front Drive
- Cooling System
- Corrosion Protection
- Diesel Engine
- DOHC Diesel Engine
- DOHC Petrol Engine
- Ecc Electronic Climate Control
- Ehps - Electrical Hydraulic Power Steering
- Electrical Equipment and Instruments
- Electrical Socket Front/ Rear
- Electrical Window Winders
- Electronic Cruise Control
- Electronic Module
- Electronic Ride Control
- Engine and Engine Aggregates
- Engine Electrics
- Eps Electrical Power Steering
- Exhaust System
- Fittings, Hinges, Locks
- Frame
- Front End
- Front Wheel Brake
- Front Wheel Suspension
- Front Wheel Suspension, Wheels and Tyres
- Fuel and Exhaust System
- Fuel Injection Systems
- Fuel System
- Fuse Box
- General Vehicle Information
- Glass, Window Guides, Window Winders
- Glassfibre Parts (Bolted)
- Graphic Info Display
- Headlamps, Lamps and Horn
- Heating, Ventilation
- Heating, Ventilation, Air Conditioning (HVAC)
- Immobiliser
- Instruments, Telltales
- Maintenance, Body and Chassis Sheet Metal Parts, Frame
- Manual Transmission Front Wheel Drive
- Manual Transmission Rear Wheel Drive
- Mid (Multi Info Display)
- Other Accessories
- Outside Rear View Mirror
- Paint
- Painting Repair Operations
- Painting Repair System
- Parkpilot
- Power Steering
- Radiator Grille
- Radio
- Rear Axle and Rear Wheel Suspension
- Rear Axle Front Wheel Drive
- Rear Wheel Brake
- Roof Luggage Carrier (Railing)
- Sac Semi Automatic Climate Control
- Seat Heating Systems
- Seats, Upholstery, Inner Trim Panels
- Service Brake, Parking Brake
- Servo Motors
- Sheet Metal Parts (Bolted)
- Sheet Metal Parts (Cement and Seal)
- Sheet Metal Parts (Welded)
- Sliding Roof
- Steering
- Steering Gear
- Steering Intermediate Shaft
- Steering Linkage
- Steering Wheel - Steering Column
- Switches
- Switches, Control Unit, Relays, Ignition Lock
- TID (Triple Info Display)
- Trailer Hitch
- Trim Panels, Radiator Grille, Spoiler
- Trim Strips, Lettering, Coverings
- Turbo-Charging
- Wheels and Tyres
- Windscreen Wash/wipe System, Heated Screen
- Wiring Harnesses
- Xenon Control Unit (Headlamp Range Control)
- Распиновка разъёмов
Repair manual
DOHC Petrol Engine Opel Vectra C
Step-by-step instructions on "DOHC Petrol Engine" for Opel Vectra C (2002–2008). Pick an article — removal, installation, adjustment and diagnostics with illustrations.
646articles
3726illustrations
Articles in this section
646 articles- How to Check and Measure the Cylinder Head and Attaching Parts (Survey) 2
- How to Check the Cylinder Head Height
- Air Mass Meter, 6 Cylinder Petrol (Motronic) 2
- How to Check for Plane Surface the Cylinder Head 1
- Air Mass Meter, 4 Cylinder Petrol 2
- How to Measure the Valve 1
- How to Check the Inner Diameter of Valve Guide 2
- Valve Stem Play, Determine 3
- Air Mass Meter, Z18XE, Z20LEL, Y22XE, Z22XE 2
- How to Check the Installation Height of Valves 5
- How to Check the Installation Height of Valve Guide 1
- Battery / Starter, Petrol (Current Measurement) 2
- Battery / Starter (Voltage Measurement) 2
- How to Overhaul the Cylinder Head
- Revised Camshafts - Z 20 NET Petrol Engine
- Cylinder Head, Attach to Assembly Tool Set KM-6215 1
- Cylinder Head, Disassemble 6
- Elimination of Exhaust Gas Recirculation Valve - Z 22 YH Petrol Engine
- How to Remove the Valves 1
- Flexible Maintenance Intervals - Vectra-C / Signum 1
- Compression 4-cylinder, Unsynchronised 1
- Valve Seat, Cut (In Cylinder Head) 3
- Compression 6-cylinder, Unsynchronised 1
- Engine Control Unit ECM Z 16 XE - Function 3
- Valve Guide, Ream 2
- Engine Control Unit ECM Z 18 XE - Function 3
- Crankshaft Impulse Sensor, Petrol and Z19DT 2
- Valve, Grind 2
- Engine Control Unit ECM Z 22 SE - Function 3
- Survey Vectra-C / Signum
- Valve, Grind In 2
- Engine Control Unit ECM Z 32 SE - Function 3
- New Engine Oil Cooler on Z 20 NET Petrol Engine 1
- How to Replace the Valve Stem Seals 1
- How to Assemble the Cylinder Head 6
- Cylinder Head Machining Special Tools 9
- Survey of All Vehicle Types
- Measuring Oil Consumption
- Modification Package for Z 20 NET DOHC Petrol Engine
- Injector (Multi-Point Fuel Injection), All Except Z22YH 2
- Intake Manifold Absolute Pressure (MAP) Sensor 2
- Engine Identifier 1
- Knock Sensor 2
- Lubrication of Radial Shaft Seal Rings No Longer Applicable
- Vacuum Pump - Z 28 NET / Nel V6 Petrol Engines 2
- Petrol Turbo Engine Z 20 ET - Overview
- View of Engine 2
- Turbo-Charging System 5
- Exhaust Manifold 2
- Crank Mechanism 1
- Fuel Distributor Pipe 1
- Cooling System 2
- Engine Oil Circulation 3
- Introduction - Z 28 NEL / Z 28 NET V6 Petrol Engine 2
- Engine Management
- Views of Engines - Z 28 NEL / Z 28 NET V6 Petrol Engine 4
- Inlet Manifold 1
- Engine-Specific Data - Z 28 NEL / Z 28 NET V6 Petrol Engine
- Torque and Power Curves - Z 28 NEL V6 Petrol Engine
- Vacuum Pump 1
- Torque and Power Curves - Z 28 NET V6 Petrol Engine
- Cylinder Head 1
- Location of Engine Number - Z 28 NEL / Z 28 NET V6 Petrol Engine 1
- Balancing Shafts 1
- Removing the Engine - Z 28 NEL / Z 28 NET V6 Petrol Engine 1
- Camshaft Sensor, F9Q, Y26SE, Y32SE, Z32SE, ZD3 2
- Crank Case Ventilation 1
- Tank Ventilation System 1
- Ribbed V-Belt - Z 28 NEL / Z 28 NET V6 Petrol Engine 1
- Camshaft Sensor, Multec S/f Except Z14XE MY2004 2
- Camshaft Sensor, Simtec 70/71/81 2
- Omission of Agr from Z 22 SE DOHC Gasoline Engines
- Exhaust Manifold Z 28 NEL / Z 28 NET V6 Petrol Engine 1
- Modified Camshaft Bearing Cover Bolted Connection 3
- Intake Manifold - Z 28 NEL / Z 28 NET V6 Petrol Engine 1
- Engine Cooling Module - Z 28 NEL / Z 28 NET V6 Petrol Engine 1
- Valve Timing - Z 28 NEL / Z 28 NET V6 Petrol Engine 1
- Ignition, Primary, Z14XE, Z16XE, Z16YNG 2
- Dohc-Petrol Engine Z 22 SE 1
- Timing Chains - Z 28 NEL / Z 28 NET V6 Petrol Engine 2
- Cylinder Block - Z 28 NEL / Z 28 NET V6 Petrol Engine 1
- Damage Diagnosis, Dual Mass Flywheel 9
- Crankshaft Seal Ring - Z 28 NEL / Z 28 NET V6 Petrol Engine 1
- Pistons and Connecting Rods - Z 28 NEL / Z 28 NET V6 Petrol Engine 1
- Crank Drive - Z 28 NEL / Z 28 NET V6 Petrol Engine 1
- Throttle Valve Potentiometer (Double Signal), Multec/trionic (MY 2001,MY 2002 and MY 2003), Simtec (MY 2001 and MY 2002) 2
- Cylinder Heads - Z 28 NEL / Z 28 NET V6 Petrol Engine 1
- Throttle Valve Potentiometer (Double Signal), Motronic (As of MY2001) 2
- Secondary Air Injection - Z 28 NEL / Z 28 NET V6 Petrol Engine 2
- Pedal Position Double Signal, All Petrol (MY 2002, MY 2003 and MY 2004) 2
- Exhaust Gas Recirculation Valve, All Petrol (MY 2002, MY 2003 and MY2004) 2
- Exhaust Gas Recirculation Valve, Motronic1.5.5 and Motronic 3.11 (MY2002 and MY 2003) 2
- Purging Air Line No Longer Fitted on Z 20 NET DOHC Turbo Petrol Engine 1
- All OHC and Dohc-Ii Petrol Engines 1
- Modifications to the Z 22 YH DOHC Petrol Engine - Vectra-C, Signum
- Ignition to Crankshaft Signal 2
- Exhaust Gas Recirculation Valve, Z22SE (MY 2002, MY 2003 and MY 2004) 2
- Introduction
- Throttle Valve Potentiometer (Double Signal), Simtec (MY 2003), Simtecand Multec-F (MY 2004) 2
- Air Mass Meter, Z20NET, Z17DTL, Z17DTH, Z19DT, Z19DTH 4
- Injector (Multi-Point Fuel Injection), Z22YH 2
- Wheel Speed Sensor (Hall Type), Vectra-C/signum 2
- Engines - Survey
- Pedal Position Double Signal, Vectra-C Z22SE (MY 2003) 2
- Engine Identification
- Survey of Engine Characteristic Data and Engine Management Systems
- Load Pressure Sensor, Signum Z20NET 2
- Engine / Transmission Mountings 1
- Z 16 XE Dohc-I Petrol Engine - Survey
- View of Engine, Z 16 XE 2
- Torque and Output Curve, Z 16 XE 1
- Z 18 XE Dohc-I Petrol Engine - Survey
- View of Engine, Z 18 XE 2
- Torque and Output Curve, Z 18 XE 1
- Z 22 SE DOHC Petrol Engine - Survey
- Torque and Output Curve, Z 22 SE 1
- Z 32 SE V6 DOHC Petrol Engine - Survey
- View of Engine, Z 32 SE 2
- Torque and Output Curve, Z 32 SE 1
- Toothed Belt, Z 32 SE 2
- Intake Plenum, Z 32 SE 9
- Engine / Transmission Combinations
- Dohc-I Petrol Engine Z 18 XE - Overview
- View of Engine Z 18 XE 2
- Torque and Power Curves of the Z 18 XE 1
- Z 20 NET DOHC Petrol Engine - Overview
- View of Z 20 NET Engine 2
- Z 22 YH DOHC Petrol Engine 1
- Torque and Power Curves of the Z 20 NET Engine 1
- Z 20 NET DOHC Turbo Petrol Engine 7
- Z 32 SE V6 DOHC Petrol Engine - Overview
- View of Engine Z 32 SE 2
- Torque and Power Curves of the Z 32 SE 1
- Exhaust Gas Recirculation Valve, Z22YH 2
- Z 22 YH DOHC Petrol Engine - Overview
- View of Engine Z 22 YH 2
- Torque and Power Curves of the Z 22 YH 1
- DOHC Petrol Engine Z 22 YH - System Description - Engine Management 1
- High-Pressure Fuel Pump of the Z 22 YH 1
- Inlet Manifold of the Z 22 YH 1
- Allocation - Engine / Vehicle Equipment and Battery
- Fuel Rail of the Z 22 YH 1
- Allocation - Engine / Vehicle Equipment and Alternator
- Ignition Module for the Z 22 YH 1
- Engine Compartment Electronics Module (UEC) - Survey 1
- Exhaust Gas Recirculation Valve for the Z 22 YH 1
- UEC - Arrangement of Relays and Fuses 2
- Pistons of the Z 22 YH 1
- Connecting-Rod of the Z 22 YH 1
- Injection Valve Control System on the Z 22 YH 1
- Crankcase Ventilation System of the Z 22 YH 1
- The Z 22 YH Engine - General
- Block Circuit Diagram of Z 22 YH 1
- View of Engine, Z 22 SE 2
- Engine Number 1
- How to Check (Z 16 XE the Compression (AC, Lhd)) 3
- How to Check (Z 16 XE) the Oil Temperature 1
- How to Check (Z 16 XE the Engine Oil Pressure (With AC, Lhd)) 4
- How to Check (Z 16 XE the Timing (Air Conditioning, Lhd)) 2
- How to Check and Adjust (Z 16 XE the Timing (With AC, Lhd)) 13
- How to Check and Correct (Z 16 XE the Toothed Belt Tension (AC, Lhd)) 11
- How to Check (Z 16 XE the Toothed Belt Tension (With AC, Lhd)) 8
- Illustration: Z 16 XE 1
- How to Remove and Install (Z 16 XE the Toothed Belt Cover - Upper Part (With AC, Lhd)) 1
- How to Remove and Install (Z 16 XE the Toothed Belt Cover - Lower Part (With AC, Lhd)) 7
- How to Replace (Z 16 XE the Toothed Belt (With AC, Lhd)) 15
- How to Replace (Z 16 XE the Toothed Belt Guide Pulley (With AC, Lhd)) 14
- How to Replace (Z 16 XE the Another Toothed Belt Guide Pulley (With AC, Lhd)) 1
- How to Replace (Z 16 XE the Toothed Belt Cover - Rear (With AC, Lhd)) 21
- How to Remove and Install (Z 16 XE the Ribbed V-Belt Tensioner (With AC, Lhd)) 3
- How to Replace (Z 16 XE the Toothed Belt Tension Roller (With AC, Lhd)) 14
- How to Remove and Install (Z 16 XE the Cylinder Head Cover (Air Conditioning, Lhd)) 3
- How to Remove and Install (Z 16 XE the Both Camshafts (With AC, Lhd)) 21
- How to Replace (Z 16 XE the Seal Rings - Front Camshaft (With AC, Lhd)) 16
- How to Replace (Z 16 XE the Camshaft Sprocket (With AC, Lhd)) 15
- How to Replace (Z 16 XE the Gasket - Exhaust Manifold (With AC, Lhd)) 2
- How to Replace (Z 16 XE the Gasket - Intake Manifold Upper Part (With AC, Lhd)) 12
- How to Replace (Z 16 XE the Gasket - Intake Manifold Lower Part (With AC, Lhd)) 13
- How to Remove and Install (Z 16 XE the Cylinder Head (With AC, Lhd)) 32
- How to Remove and Install (Z 16 XE the Flywheel (With AC, Lhd)) 1
- How to Replace (Z 16 XE the Seal Ring - Crankshaft, Rear (With AC, Lhd)) 2
- How to Replace the Flange - Cylinder Block Ventilation/engine Vent Housing 3
- Engine Oil Change (Z 16 XE, with AC, Lhd) 1
- How to Replace (Z 16 XE the Oil Filter Short Circuit Valve (With AC, Lhd)) 2
- How to Replace (Z 16 XE the Seal Ring - Crankshaft, Front (With AC, Lhd)) 13
- How to Remove and Install (Z 16 XE the Oil Pan (With AC, Lhd)) 3
- How to Remove and Install (Z 16 XE the Oil Pump (With AC, Lhd)) 26
- How to Check the Oil Pump 1
- How to Remove and Install (Z 16 XE the Oil Pump Pressure Regulating Valve (With AC, Lhd)) 6
- How to Replace (Z 16 XE the Intake Pipe for Oil Pump (With AC, Lhd)) 1
- How to Remove and Install (Z 16 XE the Oil Baffle Plate (With AC, Lhd)) 1
- How to Replace (Z 16 XE the Oil Dipstick Guide Tube (With AC, Lhd)) 1
- Sensor - Dynamic Oil Level Check (Z 16 XE, with AC, Lhd) 1
- How to Check for Leaks the Engine ((CO Content in Cooling System) (Z 16 XE)) 1
- How to Replace (Z 16 XE the Engine Damping Blocks (Both Sides) (With AC, Lhd)) 8
- How to Remove and Install (Z 16 XE the Reaction Member - Front (With AC, Lhd)) 1
- How to Replace (Z 16 XE the Reaction Member - Rear (With AC, Lhd)) 1
- How to Remove and Install (Z 16 XE the Engine Damping Block - Right (With AC, Lhd)) 5
- How to Replace (Z 16 XE the Engine Damping Block - Left (With AC, Lhd)) 6
- How to Remove and Install (Z 16 XE the Engine with Transmission (With AC, Lhd)) 26
- How to Remove and Install from Engine (Z 16 XE the Manual Transmission (With AC, Lhd)) 8
- Engine Compartment Survey (Z 16 XE) 3
- Special Service Tools 47
- Sealants, Lubricants and Locking Agents
- Specifications
- Recommended Torque Values
- DOHC I Petrol Engine (Z 18 XE, Z 18 XEL) 1
- How to Check (Z 18 XE the Oil Temperature (Z 18 XEL)) 1
- How to Check (Z 18 XE the Engine Oil Pressure (Z 18 XEL, with AC, Lhd)) 4
- How to Check (Z 18 XE the Timing (Z 18 XEL, with AC, Lhd)) 2
- How to Check and Adjust (Z 18 XE the Timing (Z 18 XEL, with AC, Lhd)) 13
- How to Check and Correct (Z 18 XE the Toothed Belt Tension (Z 18 XEL, with AC, Lhd)) 11
- How to Check (Z 18 XE the Toothed Belt Tension (Z 18 XEL, with AC, Lhd)) 8
- Illustration Z 18 XE, Z 18 XEL 1
- How to Replace (Z 18 XE the Ribbed V-Belt (Z 18 XEL, with AC, Lhd)) 2
- How to Remove and Install (Z 18 XE the Ribbed V-Belt Tensioner (Z 18 XEL, with AC, Lhd)) 3
- How to Remove and Install (Z 18 XE the Toothed Belt Cover - Upper Part (Z 18 XEL, with AC, Lhd)) 1
- How to Remove and Install (Z 18 XE the Toothed Belt Cover - Lower Part (Z 18 XEL, with AC, Lhd)) 7
- How to Replace (Z 18 XE the Toothed Belt (Z 18 XEL, with AC, Lhd)) 15
- How to Replace (Z 18 XE the Toothed Belt - Tension Roller (Z 18 XEL, with AC, Lhd)) 14
- How to Replace (Z 18 XE the Toothed Belt Guide Roller (Z 18 XEL, with AC, Lhd)) 14
- How to Replace (Z 18 XE the Toothed Belt Cover - Rear (Z 18 XEL, with AC, Lhd)) 21
- How to Remove and Install (Z 18 XE the Cylinder Head Cover (Z 18 XEL, with AC, Lhd)) 3
- How to Replace (Z 18 XE the Seal Rings - Camshaft, Front (Z 18 XEL, with AC, Lhd)) 16
- How to Remove and Install (Z 18 XE the Both Camshafts (Z 18 XEL, with AC, Lhd)) 21
- How to Replace (Z 18 XE the Gasket - Exhaust Manifold (Z 18 XEL, with AC, Lhd)) 3
- How to Replace (Z 18 XE the Gasket - Intake Manifold (Z 18 XEL, with AC, Lhd)) 10
- How to Remove and Install (Z 18 XE the Cylinder Head (Z 18 XEL, with AC, Lhd)) 29
- How to Remove and Install (Z 18 XE the Flywheel (Z 18 XEL, with AC, Lhd)) 1
- How to Replace (With A/c) (Up to MY 04) the Crankshaft Rear Seal Ring 2
- Engine Oil Change (Z 18 XE, Z 18 XEL, with AC, Lhd) 1
- How to Replace (Z 18 XE the Oil Filter Short Circuit Valve (Z 18 XEL, with AC, Lhd)) 2
- How to Replace (Z 18 XE the Seal Ring - Crankshaft, Front (Z 18 XEL, with AC, Lhd)) 15
- How to Remove and Install (Z 18 XE the Oil Pan (Z 18 XEL, with AC, Lhd)) 3
- How to Remove and Install (Z 18 XE the Oil Pump (Z 18 XEL, with AC, Lhd)) 26
- How to Remove and Install (Z 18 XE the Oil Pump Pressure Regulating Valve (Z 18 XEL, with AC, Lhd)) 6
- How to Remove and Install (Z 18 XE the Oil Intake Pipe (Z 18 XEL, with AC, Lhd)) 1
- How to Remove and Install (Z 18 XE the Oil Dipstick Guide Tube (Z 18 XEL, with AC, Lhd)) 1
- Sensor - Dynamic Oil Level Control (Z 18 XE, Z 18 XEL, with AC, Lhd) 1
- How to Check for Leaks the Engine ((CO Content in Cooling System) (Z 18 XE, Z 18 XEL)) 1
- How to Replace (Z 18 XE the Engine Damping Blocks (Both Sides) (Z 18 XEL, with AC, Lhd)) 8
- How to Remove and Install (Z 18 XE the Reaction Member - Front (Z 18 XEL, with AC, Lhd)) 1
- How to Replace (Z 18 XE the Reaction Member - Rear (Z 18 XEL, with AC, Lhd)) 1
- How to Remove and Install (Z 18 XE the Engine Damping Block - Right (Z 18 XEL, with AC, Lhd)) 5
- How to Replace (Z 18 XE the Engine Damping Block - Left (Z 18 XEL, with AC, Lhd)) 6
- How to Remove and Install (Z 18 XE the Engine with Transmission (Z 18 XEL, with AC, Lhd)) 27
- Engine Compartment Survey (Z 18 XE, Z 18 XEL) 3
- How to Check (Z 18 XE the Fuel Pressure (Z 18 XEL, with AC, Lhd)) 1
- Checking and Adjustment Values
- Ribbed V-Belt
- Engine Timing
- Oil Circulation
- Crank Drive, Cylinder Block 3
- How to Measure (Z 32 SE) the Oil Temperature 1
- How to Check (Z 32 SE the Engine Oil Pressure (With AC, Lhd)) 3
- How to Check (Z 32 SE the Fuel Pressure (With AC, Lhd)) 1
- How to Check (Z 32 SE the Timing (With AC, Rhd)) 15
- How to Adjust (Z 32 SE the Timing (With AC, Rhd)) 21
- How to Check and Correct (Z 32 SE the Toothed Belt Tension (With AC, Rhd)) 17
- How to Check the Ribbed V-Belt Tension 2
- Illustration Z 32 SE 1
- How to Replace (Z 32 SE the Ribbed V-Belt (With AC, Rhd)) 8
- How to Replace (Z 32 SE the Ribbed V-Belt Tensioner (Assembly.) (With AC, Lhd)) 3
- How to Replace (Z 32 SE the Rear Toothed Belt Cover (With AC, Rhd)) 25
- How to Replace (Z 32 SE the Front Toothed Belt Cover (With AC, Rhd)) 13
- How to Replace (Z 32 SE the Toothed Belt (With AC, Rhd)) 22
- How to Replace (Z 32 SE the Toothed Belt Tension Roller (With AC, Rhd)) 23
- How to Replace (Z 32 SE the Toothed Belt Guide Roller (With AC, Rhd)) 23
- How to Replace (Z 32 SE the Toothed Belt Drive Gear (With AC, Rhd)) 23
- How to Replace (Z 32 SE the Intake Plenum (With AC, Lhd)) 4
- How to Replace (Z 32 SE the Intake Flange (With AC, Lhd)) 6
- How to Remove and Install (Z 32 SE the Spark Plugs (With AC, Lhd)) 5
- How to Replace (Z 32 SE the Gasket - Exhaust Manifold, Cylinder Head 1-3-5 (With AC, Lhd)) 2
- How to Replace (Z 32 SE the Gasket - Exhaust Manifold, Cylinder Head 2-4-6 (With AC, Lhd)) 1
- How to Replace (Z 32 SE the Camshaft Sprockets (With AC, Rhd)) 23
- How to Remove and Install (Z 32 SE the Camshafts (With AC, Rhd)) 33
- How to Replace (Z 32 SE the Seal Rings - Camshafts (With AC, Rhd)) 25
- How to Remove and Install (Z 32 SE the Cylinder Head Cover (1-3-5) / (2-4-6) (With AC, Rhd)) 7
- How to Remove and Install (Z 32 SE the Cylinder Heads (With AC, Rhd)) 48
- How to Remove and Install (Z 32 SE the Flywheel (With AC, Rhd)) 1
- How to Replace (Z 32 SE the Seal Ring - Crankshaft, Front (With AC, Rhd)) 23
- How to Replace (Z 32 SE the Seal Ring - Crankshaft (Rear) (With AC, Rhd)) 3
- Engine Oil with Filter Change (Z 32 SE) 1
- How to Replace (Z 32 SE the Oil Filter Short Circuit Valve (With AC, Lhd)) 3
- How to Remove and Install (Z 32 SE the Oil Filter Housing (With AC, Lhd)) 2
- How to Remove and Install (Z 32 SE the Oil Dipstick Guide Tube (With AC, Lhd)) 1
- How to Remove and Install (Z 32 SE the Oil Pan (With AC, Rhd)) 3
- How to Replace (Z 32 SE the Intake Pipe for Oil Pump (With AC, Rhd)) 1
- How to Remove and Install (Z 32 SE the Oil Pump (With AC, Rhd)) 32
- How to Overhaul (Z 32 SE the Oil Pump (With AC, Rhd)) 2
- How to Remove and Install (Z 32 SE the Oil Pump Pressure Regulating Valve (With AC, Rhd)) 22
- How to Replace (Z 32 SE the Pressure Relief Valve in Oil Circuit (With AC, Rhd)) 1
- How to Replace (Z 32 SE the Heat Exchanger (With AC, Lhd)) 14
- How to Replace (Z 32 SE the Engine Vent Housing (With AC, Lhd)) 6
- How to Check for Leaks the Engine ((CO Content in Coolant) (Z 32 SE)) 1
- Toothed Belt Diagnosis - Possible Causes and Remedys 10
- How to Replace the Engine Mounting (Engine Damping Block) (Both Sides) 9
- How to Replace (Z 32 SE the Reaction Member - Rear (With AC, Rhd)) 1
- How to Replace (Z 32 SE the Reaction Member - Front (With AC, with Auxiliary Heating, Lhd)) 1
- How to Remove and Install (Z 32 SE the Engine (With AC, with Auxiliary Heating, Lhd, At)) 27
- How to Remove and Install (Z 32 SE the Engine (With AC, with Auxiliary Heating, Lhd, Mt)) 27
- How to Remove and Install from Engine (Z 32 SE the Automatic Transmission (With AC, with Auxiliary Heating, Lhd)) 16
- How to Remove and Install from Engine (Z 32 SE the Manual Transmission (With AC, with Auxiliary Heating, Lhd)) 10
- Engine Compartment Survey Z 32 SE 2
- Sealants, Lubricants and Locking Compounds (V6)
- Checking and Adjustment Values - V6
- Oil Circuit - V6
- Ribbed V-Belt - V6
- Toothed Belt - V6
- Cylinder Head - V6 1
- Crank Drive, Cylinder Block (V6) 2
- DOHC Petrol Engine (Z 22 SE) Engine Number 1
- How to Check (Z 22 SE) the Ribbed V-Belt Tension 2
- How to Check (Z 22 SE the Compression (AC, Rhd, At)) 5
- How to Check (Z 22 SE the Engine Oil Pressure (AC, Rhd, At)) 5
- How to Measure (Z 22 SE) the Oil Temperature 1
- How to Check (Z 22 SE the Timing (AC, Rhd, At)) 8
- How to Adjust (Z 22 SE the Timing (AC, Rhd, At)) 15
- Illustration (Z 22 SE) 1
- How to Replace (Z 22 SE the Ribbed V-Belt (AC, Rhd, At)) 2
- How to Replace (Z 22 SE the Ribbed V-Belt Tensioner (AC, Rhd, At)) 9
- Toothbelt - Service Intervall Overview
- How to Remove and Install (Z 22 SE the Timing Case (AC, Rhd, At)) 13
- How to Replace (Z 22 SE the Guide Rail (Primary Chain) (AC, Rhd, At)) 18
- How to Replace (Primary Chain) (Z 22 SE the Hydraulic Chain Tensioner (AC, Rhd, At)) 6
- How to Replace (Secondary Chain) (Z 22 SE the Hydraulic Chain Tensioner (AC, Rhd, At)) 13
- How to Replace (Z 22 SE the Timing Chain (Primary) (AC, Rhd, At)) 24
- How to Replace (Z 22 SE the Timing Chain (Secondary) (AC, Rhd, At)) 28
- How to Remove and Install (Z 22 SE the Cylinder Head Cover (AC, Rhd, At)) 3
- How to Replace (Z 22 SE the Camshaft Pulleys (AC, Rhd, At)) 14
- How to Remove and Install (Z 22 SE the Both Camshafts (AC, Rhd, At)) 16
- Replace Roller Cam Followers (Z 22 SE) 1
- Replace Hydraulic Valve Lifters (Z 22 SE) 2
- How to Replace (Z 22 SE the Gasket - Intake Manifold (AC, Rhd, At)) 9
- How to Replace (Z 22 SE the Gasket - Exhaust Manifold (AC, Rhd, At)) 3
- How to Replace (Z 22 SE the Cover - Camshaft Connection Flange (AC, Rhd, At)) 1
- How to Remove and Install (Z 22 SE the Cylinder Head (AC, Rhd, At)) 26
- Engine - Broken Timing Chain
- How to Replace (Z 22 SE the Pressure Relief Valve in Intake Manifold (AC, Rhd, At)) 1
- How to Remove and Install (Z 22 SE the Drive Disc (AC, Rhd, At)) 1
- How to Replace (Z 22 SE the Torsional Vibration Damper (AC, Rhd, At)) 4
- How to Replace (Z 22 SE the Seal Ring - Crankshaft (Front) (AC, Rhd, At)) 6
- How to Replace (Z 22 SE the Seal Ring - Crankshaft, Rear (AC, Rhd, At)) 2
- How to Remove and Install (Z 22 SE the Oil Pump (AC, Rhd, At)) 13
- How to Check (Z 22 SE the Oil Pump (AC, Rhd, At)) 1
- How to Remove and Install (Z 22 SE the Oil Pan (AC, Rhd, At)) 7
- Additional Operation for Replacing the Oil Pan (Z 22 SE, AC, Rhd, At) 1
- How to Remove and Install (Z 22 SE the Oil Pump Pressure Regulating Valve (AC, Rhd, At)) 2
- How to Remove and Install (Z 22 SE the Oil Dipstick Guide Tube (AC, Rhd, At)) 1
- How to Replace (Z 22 SE the Oil Pressure Switch (AC, Rhd, At)) 3
- Replace Oil Filter Short Circuit Valve 2
- How to Replace (Z 22 SE the Oil Spray Nozzles (Timing Chain) (AC, Rhd, At)) 13
- How to Check for Leaks the Engine ((CO Content in Coolant) (Z 22 SE)) 1
- How to Replace the Engine Mounting (Engine Damping Block) (Both Sides (Z 22 SE, AC, Rhd, At)) 7
- How to Remove and Install (Z 22 SE the Reaction Member - Front (Engine Damping Block) (AC, Rhd, At)) 1
- How to Remove and Install (Z 22 SE the Reaction Member - Rear (Engine Damping Block) (AC, Rhd, At)) 1
- How to Replace the Engine Mounting (Engine Damping Block) (Right Side (Z 22 SE, AC, Rhd, At)) 5
- How to Replace the Engine Mounting (Engine Damping Block) (Left Side (Z 22 SE, AC, Rhd, At)) 6
- Engine Compartment Survey (Z 22 SE) 3
- How to Remove and Install (Z 22 SE the Spark Plug (AC, Rhd, At)) 2
- Z18XE Engine - No Compression Because of a Broken Valve Spring
- Spark Plug Damages - Possible Causes and Failure Modes 5
- How to Check and Measure the Cylinder Head and Attaching Parts (Cylinder Head, Overhaul)
- How to Replace (Z 16 XE the Ribbed V-Belt (With AC, Lhd)) 2
- Engine Oil with Filter Change 1
- Check Engine Compression Loss (Z 16 XE) 7
- Replace One Con-Rod (Z 16 ZE, No A/c, Lhd) 3
- Measure Crankshaft (Z 16 XE) 8
- Repair Engine Using a Part Engine (Z 16 XE, Without AC, Lhd) 31
- How to Check (Z 18 XE the Engine Pressure Loss (Z 18 XEL)) 7
- How to Remove and Install (Z 18 XE the Camshaft Sprocket (Z 18 XEL with AC, Lhd)) 14
- How to Replace (Z 18 XE the One Con-Rod Bearing (Z 18 XEL, Without AC, Lhd)) 3
- How to Measure (Z 18 XE the Crankshaft (Z 18 XEL)) 8
- Repair Engine Using a Part Engine (Z 18 XE, Z 18 XEL with AC, Lhd) 31
- Manual Transmission, Detach and Attach From/to Engine (Z 18 XE, Z 18 XEL, with AC, Lhd) 9
- How to Check (Z 32 SE the Engine Pressure Loss (With AC, Lhd)) 9
- How to Measure (Engine Dismantled) the Crankshaft 8
- How to Remove and Install (Z 32 SE the Drive Disc (With AC, with Auxiliary Heating, Lhd)) 1
- How to Replace the Piston Rings 3
- How to Replace (Z 32 SE) the One Con-Rod Bearing 2
- Repair Engine Using an Engine Short Block 44
- How to Check (Z 22 SE the Engine Pressure Loss (AC, Lhd, At)) 6
- Engine Z28NEL/Z28NET, Oil Leakages (Oil Traces at Oilpain/transmission Housing)
- Engine Z16XER, Z18XER (Camshaft Bearing Bridge Leaky) 5
- Engine Z22SE/Z22YH, Tensioner Timing Chain (Rattling Noise from Timing Chain)
- Engine Z16/18XER, Cylinderhead (Oil Leakage Between Camshaft Bearing Bridge and Camshaft Cover) 1
- Replace All Valve Shaft Seals (Z 16 XE, with A/c, Lhd). 30
- Remove and Refit All Pistons with Con-Rods (Z 16 XE, with A/c, Lhd) 36
- DOHC Petrol Engine (Z 20 NET) Engine Number 1
- Check Ribbed V-Belt Tension (Z 20 NET) 2
- Check Compression (Z 20 NET, AC, Rhd, Mt) 4
- Check Engine Oil Pressure (Z 20 NET, AC, Rhd, Mt) 2
- Measure Oil Temperature (Z 20 NET) 1
- Check Timing (Z 20 NET, AC, Rhd, Mt) 7
- Adjust Timing (Z 20 NET, AC, Rhd, Mt) 10
- Replace Ribbed V-Belt (Z 20 NET, AC, Rhd, Mt) 2
- Remove and Refit Timing Case (Z 20 NET, AC, Rhd, Mt) 13
- Replace Guide Rail (Primary Chain) (Z 20 NET, AC, Rhd, Mt) 15
- Replace Hydraulic Chain Tensioner (Primary Chain) (Z 20 NET, AC, Rhd, Mt) 9
- Replace Timing Chain (Primary) (Z 20 NET, AC, Rhd, Mt) 27
- Replace Hydraulic Chain Tensioner (Secondary Chain) (Z 20 NET, AC, Rhd, Mt) 14
- Replace Timing Chain (Secondary) (Z 20 NET, AC, Rhd, Mt) 31
- Remove and Refit Cylinder Head Cover (Z 20 NET, AC, Rhd, Mt) 5
- Replace Camshaft Sprocket (One or Both) (Z 20 NET, AC, Rhd, Mt) 13
- Remove and Refit Both Camshafts (Z 20 NET, AC, Rhd, Mt) 17
- Replace Roller Cam Follows (Z 20 NET) 1
- Replace Hydraulic Tappets (Z 20 NET) 2
- Replace Intake Manifold Gasket (Z 20 NET, AC, Rhd, Mt) 5
- Replace Camshaft Connecting Flange Cover (Z 20 NET, AC, Rhd, Mt) 1
- Replace Exhaust Manifold (Z 20 NET, AC, Rhd, Mt) 16
- Remove and Refit Cylinder Head (Z 20 NET, AC, Rhd, Mt) 33
- Replace Vacuum Pump (Z 20 NET, AC, Rhd, Mt) 1
- Remove and Refit Flywheel (Z 20 NET, AC, Rhd, Mt) 1
- Replace Flywheel (Z 20 NET, AC, Rhd, Mt) 9
- Replace Front Crankshaft Sealing Ring (Z 20 NET, AC, Rhd, Mt) 11
- Replace Crankshaft Sealing Ring (Rear) (Z 20 NET, Mt, AC, Rhd, Mt) 1
- Remove and Refit Oil Pan (Z 20 NET, AC, Rhd, Mt) 7
- Extra Work When Replacing the Oil Pan (Z 20 NET, AC, Rhd, Mt) 1
- Remove and Refit Oil Pump Pressure Control Valve (Z 20 NET, AC, Rhd, Mt) 2
- Remove and Refit Oil Pump (Z 20 NET, AC, Rhd, Mt) 14
- Check Oil Pump (Z 20 NET, AC, Rhd, Mt) 1
- Remove and Refit Oil Dipstick Tube (Z 20 NET, AC, Rhd, Mt) 1
- Replace Oil Pressure Switch (Z 20 NET, AC, Rhd, Mt) 1
- Replace Oil Injector (Timing Chain) (Z 20 NET, AC, Rhd, Mt) 14
- Replace Oil Supply Pipe to Turbo (Z 20 NET, AC, Rhd, Mt) 8
- Remove and Refit Engine Oil Cooler (Z 20 NET, AC, Rhd, Mt) 2
- How to Check for Leaks the Engine ((CO Content in Coolant) (Z 20 NET)) 1
- How to Replace the Engine Mounting (Engine Damping Block) (Both Sides (Z 20 NET, AC, Rhd, Mt)) 8
- Replace Rear Engine Mounting (Z 20 NET, AC, Rhd, Mt) 8
- Remove and Refit Front Torque Connection (Engine Mounting) (Z 20 NET, AC, Rhd, Mt) 1
- How to Replace the Engine Mounting (Engine Damping Block) (Right Side (Z 20 NET, AC, Rhd, Mt)) 6
- How to Replace the Engine Mounting (Engine Damping Block) (Left Side (Z 20 NET, AC, Rhd, Mt)) 6
- Remove and Refit Gearbox to Engine (Z 20 NET, AC, Rhd, Mt) 17
- Replace Fuel Distribution Pipe (Z 20 NET, AC, Rhd, Mt) 6
- Check Fuel Pressure (Z 20 NET, AC, Rhd, Mt) 1
- Remove and Refit Spark Plugs (Z 20 NET, AC, Rhd, Mt) 2
- Replace Intake Manifold Pressure Sensor (Z 20 NET, AC, Rhd, Mt) 1
- Remove and Refit Alternator (Z 20 NET, AC, Rhd, Mt) 6
- Oil Circuit
- Engine Z18XER - Rattling Noise from Poly-V-Belt
- DOHC Petrol Engine (Z 22 YH) Engine Number 1
- Check Ribbed V-Belt Tension (Z 22 YH) 2
- Check Compression (Z 22 YH, AC, Lhd, At) 2
- Check Engine Pressure Loss (Z 22 YH, AC, Lhd, At) 6
- How to Check (Z 22 YH the Engine Oil Pressure (AC, Rhd, At)) 5
- Measure Oil Temperature (Z 22 YH) 1
- Check Timing (Z 22 YH, Lhd, AC) 7
- Adjust Timing (Z 22 YH, Lhd, AC) 14
- How to Replace (Z 22 YH the Ribbed V-Belt (AC, Rhd, At)) 2
- How to Remove and Install (Z 22 YH the Ribbed V-Belt Tensioner (Lhd, AC)) 10
- Remove and Refit Timing Case (Z 22 YH, Lhd, AC) 12
- Replace Guide Rail (Primary Chain) (Z 22 YH, Lhd, AC) 14
- Insert Hydraulic Chain Tensioner (Primary) (Z 22 YH, Lhd, AC) 8
- Insert Hydraulic Chain Tensioner (Secondary Chain) (Z 22 YH, Lhd, AC) 14
- Replace Timing Chain (Primary) (Z 22 YH, Lhd, AC) 24
- Replace Timing Chain (Secondary) (Z 22 YH, Lhd, AC) 27
- Remove and Cylinder Head Cover (Z 22 YH, Lhd, AC) 3
- Replace a Further Camshaft Sprocket (Z 22 YH, Lhd, AC)
- Replace Camshaft Sprocket (Z 22 YH, Lhd, AC) 13
- Remove and Refit Both Camshaft (Z 22 YH, Lhd, AC) 17
- Replace Roller Cam Followers (Z 22 YH) 1
- Replace Hydraulic Tappets (Z 22 YH) 2
- Replace Intake Manifold Gasket (Z 22 YH, Lhd, AC) 14
- How to Replace (Z 22 YH the Gasket - Exhaust Manifold (AC, Rhd, At)) 3
- Remove and Refit Cylinder Head (Z 22 YH, AC, Lhd, At) 24
- Replace High Pressure Fuel Pump (Z 22 YH, Lhd, AC) 6
- How to Remove and Install (Z 22 YH the Drive Disc (AC, Rhd, At)) 1
- Replace Torsional Vibration Damper (Z 22 YH, Lhd, AC) 2
- Replace Crankshaft Sealing Ring Front (Z 22 YH, Lhd, AC) 10
- How to Replace (Z 22 YH the Seal Ring - Crankshaft (Rear) (AC, Rhd, At)) 2
- How to Remove and Install (Z 22 YH the Oil Pump (AC, Rhd, At)) 13
- How to Check (Z 22 YH the Oil Pump (AC, Rhd, At)) 1
- How to Remove and Install (Z 22 YH the Oil Pan (AC, Rhd, At)) 7
- Additional Operation for Replacing the Oil Pan (Z 22 YH, AC, Rhd, At) 1
- How to Remove and Install (Z 22 YH the Oil Pump Pressure Regulator (AC, Rhd, At)) 2
- How to Remove and Install (Z 22 YH the Oil Dipstick Guide Tube (AC, Rhd, At)) 1
- How to Replace (Z 22 YH the Oil Pressure Switch (AC, Rhd, At)) 3
- Replace Oil Spray Nozzle (Timing Chain) (Z 22 YH, Lhd, AC) 11
- How to Check for Leaks the Engine ((CO Content in Coolant) (Z 22 YH)) 1
- How to Replace (Z 22 YH the Coolant Piper (AC, Rhd, At)) 4
- How to Replace (Z 22 YH the Control Unit Coolant Module (AC, Rhd, At)) 2
- How to Replace the Engine Mounting (Engine Damper Block) (Both Sides (Z 22 YH, Lhd, AC)) 7
- How to Remove and Install (Z 22 YH the Reaction Member - Front (Engine Damping Block) (AC, Rhd, At)) 1
- How to Remove and Install (Z 22 YH the Reaction Member - Rear (Engine Damping Block) (AC, Rhd, At)) 1
- How to Replace the Engine Mounting (Engine Damper Block) (Right Side (Z 22 YH, Lhd, AC)) 5
- How to Replace the Engine Mounting (Engine Damping Block) (Left Side (Z 22 YH, AC, Rhd, At)) 6
- How to Replace (Z 22 YH the Oxygen Sensor - Catalytic Converter Control (AC, Rhd, At)) 1
- Remove and Refit Spark Plugs (Z 22 YH, Lhd, AC) 2
- Replace Camshaft Sensor (Z 22 YH, Lhd, AC) 2
- Torque Guide Values
- How to Replace (Z 18 XE the All Valve Stem Seals (Z 18 XEL, with AC, Lhd)) 30
- Remove and Refit All Pistons with Con-Rods (Z 18 XE, Z 18 XEL, with A/c, Lhd) 34
- Remove and Refit All Pistons with Con-Rods (Z 22 SE, AC, Lhd, At) 33
- Replace Piston Rings (Z 22 SE) 1
- Replace One Piston And/or Con-Rod (Piston Removed with Con-Rod) (Z 22 SE) 1
- Replace All Valve Stem Seals (Z 32 SE) 8
- Remove and Refit All Pistons with Con-Rods (Z 32 SE, with A/c, Rhd) 35
- Replace Pistons 2
- How to Remove and Install (Z 16 XE the Spark Plugs (With AC, Lhd)) 2
- Check Engine Pressure Loss (Z 20 NET, Lhd, AC) 4
- How to Remove and Install (Z 18 XE the Spark Plugs (Z 18 XEL, with AC, Lhd)) 2
- Repair Radiator Fastening Pin 1
- How to Remove and Install (Z 32 SE the Crankshaft (With Air Conditioning)) 29
- Engine Compartment Overview (Z 20 NET) 3
- How to Replace (Z 20 NET the All Valve Stem Seals (AC, Rhd, Mt)) 5
- How to Replace (Piston with Con-Rod Removed) (Z 20 NET) the One Piston And/or Con-Rod 1
- How to Replace (Z 22 SE the All Valve Stem Seals (AC, Rhd, At)) 5
- How to Replace (Z 22 YH) the All Valve Stem Seals 5
- How to Remove and Install (Z 22 YH) the All Pistons with Con-Rods 34
- How to Replace (Piston Removed with Con-Rod) (Z 22 YH) the One Piston And/or Con-Rod 1
- Engine Compartment Overview (Z 22 YH) 3
- Repair Upper Radiator Fastening Pin
- Repair Lower Radiator Fastening Pin
- Illustration Secondary Air System (Up to MY 2007) 1
- Illustration of Vacuum Hoses 1
- Illustration Timing Chain Level 1 (Z28NEL, Z28NET Up to MY 2006) 1
- Illustration Timing Chain Level 2 (Z28NET as of MY 2007) 1
- Illustration of Coolant Hoses 1
- Replace Air Cleaner Housing 1
- Replace Air Intake Pipe 1
- Replace Ribbed V-Belt 1
- Replace Ribbed V-Belt Tensioner 1
- Remove and Install Timing Case Cover (Up to MY 2007) 65
- Remove and Install Torsional Vibration Damper 4
- Remove and Install Intake Manifold Upper Part 8
- Remove and Install Intake Manifold Lower Part 6
- Replace Exhaust Manifold Heat Shield for Cylinders 1, 3 and 5 17
- Replace Exhaust Manifold Gasket for Cylinders 1-3-5 (Z28NEL, Z28NET Up to MY 2007) 5
- Remove and Install Cylinder Head Cover for Cylinders 1, 3 and 5 16
- Remove and Install Cylinder Head Cover of Cylinder 2-4-6 (Z28NEL, Z28NET Up to MY 2007) 29
- Replace (Front) Crankshaft Seal Ring 7
- Replace (Rear) Crankshaft Seal Ring 5
- Remove and Install Oil Filter Housing 4
- Replace Oil Intake Pipe 3
- Replace Engine Oil Filler Port 1
- Replace Turbo Oil Return Line 5
- Replace Secondary Air System Pump 1
- Replace Rear Engine Damping Block 1
- Replace Front Engine Damping Block 1
- Replace Right-Hand Engine Damping Block 4
- Replace Left-Hand Engine Damping Block 5
- How to Remove and Install the Manual Transmission from Engine 24
- Illustration of Air Ducts 1
- Illustration of Thread Repair - Upper Side of Cylinder Head 2-4-6 1
- Illustration of Thread Repair - Front Side of Cylinder Head 2-4-6 1
- Illustration of Thread Repair - Intake Side of Cylinder Head 2-4-6 1
- Illustration of Thread Repair - Exhaust Side of Cylinder Head 2-4-6 1
- Illustration of Thread Repair - Back of Cylinder Head 2-4-6 1
- Illustration of Thread Repair - Upper Side of Cylinder Head 1-3-5 1
- Illustration of Thread Repair - Front Side of Cylinder Head 1-3-5 1
- Illustration of Thread Repair - Intake Side of Cylinder Head 1-3-5 1
- Illustration of Thread Repair - Exhaust Side of Cylinder Head 1-3-5 1
- Illustration of Thread Repair - Back of Cylinder Head 1-3-5 1
- Illustration of Thread Repair - Front Side of Cylinder Block 1
- Illustration of Thread Repair - Cylinder Block Side of Cylinders 2-4-6 1
- Illustration of Thread Repair - Cylinder Block Side of Cylinders 1-3-5 1
- Illustration of Thread Repair - Back of Cylinder Block 1
- Illustration of Thread Repair - Underside of Cylinder Block 1
- Illustration of Thread Repair - Upper Side of Cylinder Block, Cylinders 2-4-6 1
- Illustration of Thread Repair - Upper Side of Cylinder Block, Cylinders 1-3-5 1
- Illustration of Thread Repair - Timing Case Cover 1
- Engine Code / Engine Number 1
- Check Engine for Leaks (CO Content of Coolant) 1
- Check Fuel Pressure 1
- How to Check the Engine Oil Pressure 2
- Check Ribbed V-Belt Tensioner 1
- Check Engine Compression Loss 3
- How to Check the Compression 5
- How to Replace the Guide Rail (Secondary Chain) of Cylinders 1-3-5 1
- How to Replace the Guide Rail (Secondary Chain) of Cylinders 2-4-6 1
- How to Replace the Guide Rail (Primary Chain, Top) 1
- How to Replace the Tensioning Rail (Secondary Chain) of Cylinders 1-3-5 1
- How to Replace the Tensioning Rail (Secondary Chain) of Cylinders 2-4-6 1
- How to Remove and Install the Automatic Transmission from Engine 51
- How to Replace the Engine Oil Level Sensor 2
- Repair of Standard Threads 17
- Repairing the Thread of the Crankshaft Main Bearing Cover (Outer Bolts) 16
- Repairing the Thread of the Crankshaft Main Bearing Cover (Inner Bolts) 16
- Repairing Countersunk Threads 16
- Repairing Tapered Threads 16
- Repairing the Thread of Cylinder Head Bolts 16
- Check Oil Pressure 2
- Check Engine for Leaks (CO Content in Cooling System) 1
- Replace Resonator 3
- Replace Toothed Belt Cover (Upper) 1
- Adjust Timing 3
- Remove and Install Cylinder Head Cover 3
- Replace Camshaft Sprockets 8
- How to Remove and Install the Both Camshafts
- Check Valve Lash and Adjust 26
- Replace Camshaft Sealing Ring 1
- Replace Exhaust Manifold Gasket 9
- Replace Intake Manifold Gasket 14
- Detaching and Attaching Components, Cylinder Head 6
- Remove and Install Valve Lifters
- Engine Oil with Oil Filter Change 1
- Remove and Install Oil Pan 7
- Replace Oil Dipstick Guide Tube 1
- Replace Engine Damping Block (Front) 1
- Dohc-I Sealing, Lubricating and Locking Materials
- Test and Adjustment Values - Dohc-I
- Toothed Belt
- Remove and Install Air Cleaner Housing 1
- Replace Front Upper Toothed Belt Cover 1
- Replace Front Centre Toothed Belt Cover 5
- Replace Engine Breather Pipe 1
- Replace Valves - Camshaft Adjustment 1
- Replace Con-Rod Bearing 8
- Check Con-Rod Play (With Plastigage) 2
- Check Con-Rod Bearing Play (With External Micrometer and Internal Measuring Instrument) 2
- Check Crankshaft Longitudinal Play 1
- Check Crankshaft Out-Of-Roundness 1
- Check Crankshaft Bearing Play (With Plastigage) - 2
- Check Crankshaft Bearing Play (With Micrometer and Interior Measuring Instrument) 2
- Remove and Install Oil Dipstick Tube 1
- Replace Oil Pressure Switch 2
- Replace Oil Pressure Control Valve 1
- Replace Pressure Relief Valve 1
- Remove and Install Spark Plugs
- How to Remove and Install the Drive Disc 1
- Replace All Con-Rod Bearings 2
- Check Crankshaft Bearing Play (With External Micrometer and Interior Measuring Instrument) 2
- Check Cylinder Block for Plane Surface 1
- How to Remove and Install the Oil Pump 1
- Replace Oil Spray Nozzle 1
- Replace Ribbed V-Belt Tensioner (Z 20 NET, AC, Rhd, Mt) 10
- How to Remove and Install the Camshafts
- How to Remove and Install the Attachments
- Replace Toothed Belt Tensioner 5
- Replace Toothed Belt Deflector Roller 6
- How to Replace the Intake Manifold Flange 3
- Make Holes for Adapter KM-412-31 2
- How to Replace (From MY 05) the Crankshaft Rear Seal Ring 4
- How to Replace (New Version from MY 2005) the Crankshaft Seal Ring (Rear) 5
- How to Remove and Install the Exhaust Duct Cover 1
- Replace Toothed Belt 5
- How to Check the Timing 2
- Illustration Secondary Air System (As of MY 2008) 1
- Illustration Timing Chain Level 1 (Z28NET as of MY 2007) 1
- Illustration Timing Chain Level 2 (Z28NEL, Z28NET Up to MY 2006) 1
- Remove and Install Timing Case Cover (As of MY 2008) 65
- Replace Exhaust Manifold Gasket for Cylinders 1-3-5 (Z28NET as of MY 2008) 5
- Remove and Install Cylinder Head Cover of Cylinders 2-4-6 (Z28NET as of MY 2008) 29
- Replace Camshaft Sprocket Exhaust Side for Cylinders 1-3-5 (Z28NEL, Z28NET Up to MY 2006) 1
- Replace Camshaft Sprocket Exhaust Side for Cylinders 2-4-6 (Z28NEL, Z28NET Up to MY 2006) 1
- Camshaft Marking 2