Remove
- 1. Open bonnet
- 2. Remove engine cover.
Note. The oil filter short-circuit valve is integrated into the oil filter housing cover and can thus only be replaced as an assembly with the oil filter housing cover.
- 3. Remove oil filter short circuit valve • Place collecting basin underneath. • Remove oil filter housing cover/oil filter short-circuit valve (2) using KM-6150 (1)
Install
- 4. Install oil filter short circuit valve • Insert oil filter element (1) • Attach oil filter housing cover/oil short-circuit valve – Replace gasket (2) – Tightening torque 25 Nm .
- 5. Check engine oil level and correct if necessary.
Note. Observe specified engine oil filling quantity
- 6. Attach engine cover.
- 7. Close bonnet