Engine Oil with Filter Change Opel Vectra C

Remove

1. 1. Raise vehicle
2. 2. Drain engine oil • Place collecting basin underneath. • Remove drain bolt (1)
3. 3. Remove oil filter insert • Remove oil filter housing cover (2) • Remove oil filter element

Install

4. 4. Install oil filter element • Insert oil filter element • Attach oil filter housing cover – Replace seal ring – Tighten oil filter housing cover 25 Nm
5. 5. Screw in oil drain bolt • Replace seal ring • Tighten bolt – Tightening torque 25 Nm .
6. 6. Lower vehicle
7. 7. Open bonnet
8. 8. Top up engine oil. • Observe specified engine oil quantity • Start engine and allow to run until oil pressure telltale extinguishes. • Check engine oil level, if necessary correct.
9. 9. Close bonnet