SIMTEC 56.1 F2: TROUBLE CODE TABLE
| Trouble Code | Information Sensor |
|---|---|
| Cause of Fault | Remedy in |
F0: DATA LIST
| No. | Trouble Code Storage when... |
25
| INJECTOR VALVE 1 |
VOLTAGE HIGH
| 32 |
|---|
| · Engine not in operating condition: engine stationary, start, deceleration |
fuel cutoff and engine speed limitation
· Short circuit to voltage or circuit interruption
· Conditions must be fulfilled for at least 3.5 s
Effects:
· Oxygen sensor regulation and controlled canister purge valve regulation are blocked
· Controlled canister purge valve closed
· All adaptation except throttle valve adaptation and idle speed adjuster adaption is blocked.