Simtec 56.0/ 56.1 F2:TROUBLE CODE TABLE
| Trouble Code | Information Sensor Cause of Fault | Remedy in F0:DATA LIST No. | Trouble Code Storage when ... |
|---|---|---|---|
| 93 | IMMOBILISER NO SIGNAL | 43 | Vehicles with immobiliser only: |
· Immobiliser function activated in engine control unit
· Engine control unit initialised (operating condition)
· Engine control unit does not recognise an imo signal from the immobiliser control unit after request
Effects:
· The engine telltale flashes
| · Approx. 1 s after ignition ON, the injection function is blocked and the fuel pump switched off |