Simtec 56.0/ 56.1 F2:TROUBLE CODE TABLE
| Trouble Code | Information Sensor Cause of Fault | Remedy in F0:DATA LIST No. | Trouble Code Storage when ... |
|---|---|---|---|
| 16 | KNOCK SIGNAL CIRCUIT | 10 | · Coolant temperature higher than 30 °C/ 86 °F (X 20 XEV) or higher than 35 °C/ 95 °F (C 18 XE/ C 18 XEL) |
· Engine speed higher than 1984 rpm
· Knock sensor signal (noise value) lower than 160 mV (short circuit to ground/ voltage or circuit interruption)
· Air mass greater than 200 mg/ stroke
· Conditions must be fulfilled for at least 2 s
Replacement values:
· The control unit retards the firing angle by 12 °CA in the interest of safety
Effects:
| · Knock control is switched off |