Table 2, Digital Diesel Electronics DDE 2.1 F2:TROUBLE CODE TABLE
| Trouble Code | Information Sensor Cause of Fault | Remedy in F0:DATA LIST No. | Trouble Code Storage when... |
|---|---|---|---|
| 34 | INJ. TIMING OUT OF RANGE | 22 | · Current start of injection value is lower than nominal start of injection value -2 °CA |
or
· Current start of injection value is higher than nominal start of injection value +2 °CA
· Conditions must be fulfilled for at least 21 s
Effects:
· The injection quantity is reduced to 21 mg/ stroke, i.e. maximum output is reduced.
· The exhaust gas recirculation valve is switched off.
Note:
The current start of injection value is determined by the start of injection sensor, the nominal start of injection value is calculated by the control unit.