Motronic M 2.8.1 F2: TROUBLE CODE TABLE
| Trouble Code | Information Sensor |
|---|---|
| Cause of Fault | Remedy in |
F0: DATA LIST
| No. | Trouble Code Storage when... |
18
| KNOCK CONTROL MODULE; REPLACE ECU |
|---|
| 08 |
| · Coolant temperature lower than 45 °C / 113 °F |
or
· Load signal less than 1.6 ms (X 25 XE) or 1.8 ms (X 30 XE)
The value varies depending on the engine speed
· Engine speed higher than 600 rpm and lower than 5000 rpm
· The control unit performs an internal knock sensor circuit test every 253
combustions. If this test is not passed, the trouble code is set (control unit fault).
Replacement values:
See trouble code 16