Table 2, Digital Diesel Electronics DDE 2.1 F2:TROUBLE CODE TABLE
| Trouble Code | Information Sensor Cause of Fault | Remedy in F0:DATA LIST No. | Trouble Code Storage when... |
|---|---|---|---|
| 15 | COOLANT TEMP. VOLTAGE HIGH | 02 | · Coolant temperature lower than -40 °C/ - 40 °F (voltage higher than 4.92 V) |
(short circuit to voltage or circuit interruption)
· Condition must be fulfilled for at least 0.5 s
Replacement values:
· The current fuel temperature is used for the fuel quantity allocation and for actuation of the exhaust gas recirculation valve
· 50 °C/ 122 °F for preheating
· 50 °C/ 122 °F for start of injection
· 130 °C/ 266 °F for AC compressor cutoff
Note:
The sensor can be destroyed by a short circuit to the battery.