B-08, Engine Does Not Start
| B-08, Engine does not start |
|---|
| Test | Work Order Description | Nominal Value |
| T01 | Check: Fuel Reserve | |
| Check fuel reserve Note: The fuel reserve must be more than 5 l. | |
| YES: T02 | No: - |
| T02 | Check: Selector Lever Position | |
| Vehicle with automatic transmission: Check selector lever position Note: The selector lever must be in the following position: P/N | |
| Yes: T03 | No: - |
| T03 | Check: Electronic System | |
| Vehicle with Immobiliser: Check electronic system for proper operation: Immobiliser See corresponding Checking Procedure After successful check/repair continue with next test step Note: When selecting F0 Data List note that the parameter check can only be performed for those parameters that are checked with ignition OFF or ON respectively. | |
| Yes: T04 | No: - |
| T04 | Check: Functional Group | |
| Check the following functional group for proper operation Fuel Pump Circuit Refer to table B07, Fuel Pump Circuit After successful check/repair continue with next test step | |
| Yes: T05 | No: - |
| T05 | Check: Functional Group | |
| Check the following functional group for proper operation: Filterheating Circuit Refer to table B-07, Filterheating Circuit Fuel pressure See corresponding Service Instruction Fuel lines or Fuel filter Blockage (e.g. paraffin deposits) Leakage, air or water in system See corresponding Service Instruction After successful check/repair continue with next test step | |
| Yes: T06 | No: - |
| T06 | Check: Functional Group | |
| Check the following functional group for proper operation: Y5 Solenoid-Fuel Cut Off See corresponding Service Instruction After successful check/repair continue with next test step | |
| Yes: T07 | No: - |
| T07 | Check: Functional Group | |
| Check the following functional group for proper operation: Injection Valves See corresponding Service Instruction After successful check/repair continue with next test step | |
| Yes: T08 | No: - |
| T08 | Check: Functional Group | |
| Check the following functional group for proper operation: M1 Starter See corresponding Service Instruction After successful check/repair continue with next test step | |
| Yes: T09 | No: - |
| T09 | Check: System | |
| Vehicle with automatic transmission: Check the following system for proper operation: S118 Switch-Automatic Transmission See corresponding Checking Procedure AR 25/35 Automatic 4-Speed Transmission After successful check/repair continue with next test step Note: When selecting F0 Data List note that the parameter check can only be performed for those parameters that are checked with ignition OFF or ON respectively. | |
| Yes: T10 | No: - |
| T10 | Mechanical Check | |
| Check the following functional group for proper operation: Engine-compression See corresponding Service Instruction Intake system Leakage, plugging See corresponding Service Instruction Engine oil pressure See corresponding Service Instruction Timing See corresponding Service Instruction Exhaust-gas turbo charger See corresponding Service Instruction Static check of injection pump See corresponding Service Instruction Position of engine relative to injection pump See corresponding Service Instruction | |
| Yes: - | No: - |
