Home/Opel/Vectra/Opel Vectra C (2002-2008)/Repair manual/Diesel Engine/Replace Differential Pressure Sensor

Contents

Wiring diagrams Section: Diesel Engine

All sections

Replace Differential Pressure Sensor Opel Vectra C

Diesel Engine 1 illustration

Note. Before replacing the differential pressure sensor, check hoses for leaks or blockages

Remove

1. Open bonnet
2. Remove differential pressure sensor (1) • Disconnect wiring harness connector. • Unscrew nut • Remove 2x vacuum line – Release 2x clamp

Note. Mark vacuum lines

Replace Differential Pressure Sensor

Install

3. Install differential pressure sensor • Attach 2x vacuum line – Fasten 2 new clamps • Tighten nuts • Connect wiring harness plug

Note. Note marking

4. Programming differential pressure sensor with Tech 2
5. Close bonnet