Home/Opel/Vectra/Opel Vectra C (2002-2008)/Repair manual/Diesel Engine/Replace Dynamic Oil Level Check Sensor

Contents

Wiring diagrams Section: Diesel Engine

All sections

Replace Dynamic Oil Level Check Sensor Opel Vectra C

Diesel Engine 1 illustration

Remove

1. Remove oil pan
2. Remove dynamic oil level check sensor (1) • Unclip retaining clamp (2) • Unscrew 2x bolt

Note. Press dynamic oil level check sensor wiring harness plug (3) carefully into oil pan.

Replace Dynamic Oil Level Check Sensor

Install

3. Cleaning work • Oil pan
4. Install dynamic oil level control sensor • 2x bolts 9 Nm • Clip in retaining clamp

Note. Coat seal ring of wiring harness plug of dynamic oil level check sensor with engine oil.

5. Attach oil pan