- 1. Open bonnet
- 2. Disconnect battery.
- 3. Raise vehicle
- 4. Detach lower engine compartment cover and right-hand engine splash protection if necessary
- 5. Detach rear reaction member bracket • Unscrew 4x bolt (arrows)
- 6. Remove rear reaction member • Unscrew 2x nut • Remove 2x bolt
- 7. Install rear reaction member • Insert 2x bolt • Replace 2x nut • 2x nuts 60 Nm
- 8. Attach rear reaction member bracket • 4x bolts 80 Nm
- 9. Attach lower engine compartment cover and right-hand engine splash protection if removed
- 10. Lower vehicle
- 11. Connect battery.
- 12. Program volatile memories
- 13. Close bonnet