Remove
- 1. Open bonnet
- 2. Detach engine cover. • Unscrew 2x bolt • Unscrew oil filler cap • Remove engine cover • Screw in oil filler cap
- 3. Remove charge pressure sensor (3) • Detach wiring harness plug (2). • Remove bolt (1)
Install
- 4. Install charge pressure sensor • Replace seal ring • Tighten bolt • Connect wiring harness plug.
- 5. Attach engine cover. • Unscrew oil filler cap • Place engine cover in position • Screw in oil filler cap • 2x bolts 9 Nm
- 6. Close bonnet