Home/Opel/Vectra/Opel Vectra C (2002-2008)/Repair manual/Diesel Engine/Replace Oil Pressure Switch

Contents

Wiring diagrams Section: Diesel Engine

All sections

Replace Oil Pressure Switch Opel Vectra C

Diesel Engine 1 illustration ~103 words

1. Open bonnet
2. Disconnect battery.
3. Raise vehicle
4. Detach lower engine compartment cover and right-hand engine splash protection if necessary
5. Remove oil pressure switch (2) • Place collecting basin underneath. • Disconnect wiring harness plug (1)

Replace Oil Pressure Switch

6. Install oil pressure switch • Oil pressure switch 22 Nm • Replace seal ring • Connect wiring harness plug.
7. Attach lower engine compartment cover and right-hand engine splash protection if removed
8. Lower vehicle
9. Connect battery.
10. Program volatile memories
11. Check engine oil level, if necessary correct. • Observe specified engine oil quantity
12. Close bonnet