Remove
- 1. Open bonnet
- 2. Disconnect earth cable from battery • Slacken nut
- 3. Raise vehicle by its full height
- 4. Place collecting basin underneath.
- 5. Detach turbocharger oil feed line (1) • Release clamp (3) • Unscrew 2x bolts (2)
Install
- 6. Install turbocharger oil return line • Tighten 2x bolt 8 Nm • Attach clamp
- 7. Lower vehicle by its full height
- 8. Connect earth cable to battery • Tighten nut
- 9. Program volatile memories
- 10. Check engine oil level and correct if necessary
- 11. Close bonnet