Spezialwerkzeugliste:
KM-194-E
Note. Condition: Engine at operating temperature (oil temperature min. 80 °C)
- 1. Open bonnet
- 2. Remove engine cover
- 3. Remove ignition module (1) • Unscrew 4x bolts (2) • Release and unplug wiring harness plug
- 4. Remove 4 spark plugs with KM-194-E
- 5. Establish communication • Connect Tech 2 • Call actuator test • Select compression test
- 6. Check compression using compression testing device • 4 cylinder • Start engine (approx. 4 seconds) • Compare compression values
Note. 2nd mechanic is required
Note. Engine revs at least 300 rpm
- 7. Stop communication • Remove Tech 2
Install
- 8. Install spark plugs • Tighten 4 spark plugs using KM-194-E 25 Nm
- 9. Attach ignition module • Tighten 4x bolt 9 Nm • Connect and lock wiring harness plug
- 10. Attach engine cover
- 11. Close bonnet