Remove
- 1. Remove oil pan
- 2. Remove oil baffle plate (1). • Unscrew 2x bolts (2)
- 3. Remove oil level sensor • Detach retaining plate (1) in the direction of the arrow – Take out connection plug (2) inwards • Detach oil level sensor (3) – Unscrew 2x bolts (4)
Install
- 4. Install oil level sensor • Replace sealing ring • Tighten 2x bolt 8 Nm • Insert connection plug • Attach wiring harness • Attach retaining plate
- 5. Install oil baffle plate • Tighten 2x bolt 8 Nm
- 6. Install oil pan