Remove
- 1. Open bonnet
- 2. Raise vehicle by its full height
- 3. Remove lower engine compartment cover (2) • Unscrew 4x bolts (1) • Remove 2x body-bound rivets (3)
- 4. Remove oil pump pressure regulating valve (arrow) • Place collecting basin underneath. • Unscrew closure bolt (1) • Remove seal ring (2) • Remove piston (4), spring (3)
- 5. Visually check components • Piston, spring
Note. Check ease of movement
Install
- 6. Install oil pump pressure regulating valve • Replace sealing ring • Tighten closure bolt 40 Nm
Note. Coat piston and spring with engine oil
- 7. Install lower engine compartment cover • Tighten 4x bolts • Install 2x body-bound rivets
- 8. Lower vehicle by its full height
- 9. Check and correct engine oil level
Note. Observe specified engine oil filling quantity
- 10. Close bonnet