Replace Ribbed V-Belt Tensioner Opel Astra H

Spezialwerkzeugliste:

KM-6151

Remove

1. 1. Raise vehicle by its full height
2. 2. Remove lower engine compartment cover (2) • Unscrew 4x bolts (1) • Remove 2x body-bound rivets (3)

3. 3. Remove ribbed V-belt • Mark direction of rotation of ribbed V-belt • Tension the ribbed V-belt tensioner using KM-6151 in the direction of the arrow – Remove ribbed-V-belt

4. 4. Remove ribbed V-belt tensioner • Unscrew bolt

Install

5. 5. Attach ribbed V-belt tensioner - • Tighten bolt 43 Nm

Note. Sprue (1) of ribbed V-belt tensioner tensioning device engages in timing case hole (2)

6. 6. Insert ribbed V-belt • Position ribbed V-belt • Tension the ribbed V-belt tensioner using KM-6151 in the direction of the arrow

Note. Note direction of rotation and installation position of ribbed V-belt

7. 7. Install lower engine compartment cover • Tighten 4x bolts • Install 2x body-bound rivets
8. 8. Lower vehicle by its full height