Home ReviewsRefund
Home/Opel/Vectra/Opel Vectra C (2002-2008)/Repair manual/Fuel Injection Systems/Replace Accelerator Pedal Module
Contents Wiring diagrams Section: Fuel Injection Systems All sections

Replace Accelerator Pedal Module Opel Vectra C

Fuel Injection Systems 2 illustrations

Remove

  1. 1. Remove inner panelling for lower instrument panel padding (1) • Unscrew 5x bolt (2) • Detach light switch centre wiring harness plug
  1. 2. Remove accelerator pedal module • Unscrew 3x nut (arrows) • Disconnect wiring harness plug (1)

Install

  1. 3. Install accelerator pedal module • Connect wiring harness plug • Tighten 3x nut 9 Nm – Use new nuts
  2. 4. Install inner panelling for lower instrument panel padding • Connect light switch centre wiring harness plug • Tighten 5x bolt

More articles — Engine and Engine Aggregates