Home ReviewsRefund
Home/Opel/Vectra/Opel Vectra C (2002-2008)/Repair manual/Fuel Injection Systems/Replace Mixture Regulation Oxygen Sensor
Contents Wiring diagrams Section: Fuel Injection Systems All sections

Replace Mixture Regulation Oxygen Sensor Opel Vectra C

Fuel Injection Systems 2 illustrations

Remove

  1. 1. Open bonnet
  2. 2. Connect wiring harness plug, mixture regulation oxygen sensor (1) • Unclip from bracket
  1. 3. Remove mixture regulation oxygen sensor (1) with KM-6179

Install

  1. 4. Install mixture regulation oxygen sensor 40 Nm • Connect wiring harness plug – Clip into bracket • Route wiring harness for mixture regulation oxygen sensor – Clip in 2x

Note. If re-using the oxygen sensor catalytic converter control, wet the thread of the sensor with assembly paste

  1. 5. Close bonnet

More articles — Engine and Engine Aggregates