Remove and Install Drive Pedal Module Opel Vectra C

Remove

1. 1. Detach lower panelling for instrument panel padding (driver's side)
2. 2. Disconnect wiring harness plug (1) • Release wiring harness plug in direction of arrow
3. 3. Remove accelerator pedal module • Unscrew 3 nuts (2)

Install

4. 4. Install accelerator pedal module • Tighten 3x nut 12 Nm – Use new nuts
5. 5. Connect wiring harness plug
6. 6. Attach lower panelling for instrument panel padding (driver's side)