Replace Camshaft Sensors. Opel Vectra C

Remove

1. 1. Open bonnet
2. 2. Remove camshaft sensor, inlet camshaft (2) • Disconnect wiring harness plug (1) • Remove bolt
3. 3. Remove camshaft sensor, exhaust camshaft (4) • Disconnect wiring harness plug (3). • Unclip wiring harness, oxygen sensor mixture control, from bracket • Remove bolt

Install

4. 4. Install camshaft sensor, exhaust camshaft • Tighten bolt 6 Nm • Clip wiring harness, oxygen sensor mixture control, to bracket • Connect wiring harness plug
5. 5. Install camshaft sensor, inlet camshaft • Tighten bolt 6 Nm • Connect wiring harness plug
6. 6. Close bonnet