Home/Opel/Vectra/Opel Vectra C (2002-2008)/Repair manual/Fuel Injection Systems/Replace Charge Pressure Sensor

Contents

Wiring diagrams Section: Fuel Injection Systems

All sections

Replace Charge Pressure Sensor Opel Vectra C

Fuel Injection Systems 1 illustration

Remove

1. Open bonnet
2. Remove charge pressure sensor (1) from charge air pipe • Separate cable tie • Disconnect wiring harness plug (3). • Remove bolt (2)

Replace Charge Pressure Sensor

Install

3. Install charge pressure sensor in charge air pipe • Tighten bolt 1.5 Nm • Connect wiring harness plug • Attach cable ties
4. Close bonnet