Home/Opel/Vectra/Opel Vectra C (2002-2008)/Repair manual/Fuel Injection Systems/Replace Pedal Sensor (Z 20 NET with A/c, Rhd)

Contents

Wiring diagrams Section: Fuel Injection Systems

All sections

Replace Pedal Sensor (Z 20 NET with A/c, Rhd) Opel Vectra C

Fuel Injection Systems 2 illustrations

Remove

1. Remove inner panelling for lower instrument panel padding (1) • Unscrew 5x bolt (2) • Detach light switch centre wiring harness plug

Replace Pedal Sensor (Z 20 NET with A/c, Rhd)

2. Remove pedal sensor • Unscrew 3x nut (arrows) • Disconnect wiring harness plug (1)

Replace Pedal Sensor (Z 20 NET with A/c, Rhd)

Install

3. Install pedal sensor • Connect wiring harness plug. • Replace 3x nut • Tighten 3x nut – Tightening torque 9 Nm
4. Install inner panelling for lower instrument panel padding • Connect light switch centre wiring harness plug • Tighten 5x bolt