Home ReviewsRefund Car not listed?
Home/Opel/Vectra/Opel Vectra C (2002-2008)/Repair manual/Fuel Injection Systems/Replace Coolant Temperature Sensor (Y 30 DT, Rhd, with Air …
Contents Wiring diagrams Section: Fuel Injection Systems All sections

Replace Coolant Temperature Sensor (Y 30 DT, Rhd, with Air Conditioning) Opel Vectra C

Fuel Injection Systems 1 illustration
  1. 1. Open bonnet
  1. 2. Remove coolant temperature sensor (1) • Place collecting basin underneath. • Disconnect wiring harness plug
  2. 3. Install coolant temperature sensor • Replace seal ring • Tightening torque 23 Nm . • Connect wiring harness plug.
  3. 4. Check and correct coolant level
  4. 5. Close bonnet

More articles — Engine and Engine Aggregates