Remove
- 1. Open bonnet
- 2. Remove solenoid valve (1) • Detach 2x vacuum hose • Unscrew 2x nut • Disconnect wiring harness plug
Install
- 3. Install solenoid valve • Connect wiring harness plug. • 2x nuts 9 Nm • Attach 2x vacuum hose
- 4. Close bonnet
Home/Opel/Vectra/Opel Vectra C (2002-2008)/Repair manual/Fuel Injection Systems/Replace Charge Pressure Control Solenoid Valve
Contents
Wiring diagrams Section: Fuel Injection Systems- Measurement of the Diesel Fuel Return Quantity
- EDC16C9 Engine Management System
- Common Rail System - Z 19 DT OHC Diesel Engine, Z 19 DTH DOHC Diesel Engine
- CRIP2-MI Injector
- Measuring the Diesel Fuel Return Quantity of Bosch Solenoid Valve Injectors
- Spark Plugs - Z 28 NEL / Z 28 NET V6 Petrol Engine
- Injector Programming in Common Rail Engines
- Engine Management - Z 28 NEL / Z 28 NET V6 Petrol Engine
- Maintenance-Free Diesel Particle Filter System (DPF)
- Crankshaft Sensor - Z 28 NEL / Z 28 NET V6 Petrol Engine
- Camshaft Sensor - Z 28 NEL / Z 28 NET V6 Petrol Engine
- Knock Sensors - Z 28 NEL / Z 28 NET V6 Petrol Engine
- Injector Nozzles - Z 28 NEL / Z 28 NET V6 Petrol Engine
- Denso 0100 Engine Management System - Z 30 DT DOHC Diesel Engine
- Diesel Particulate Filter - Z 30 DT DOHC Diesel Engine
- New Simtec 81.1 Engine Control Unit, Z 22 YH (Vectra-C, Signum)
- Fuel Distribution Pipe, Z 22 YH (Vectra-C, Signum)
- Retrofit Kit for Diesel Particulate Filter - Z 19 DT, Z 19 DTH, Z 19 DTL Diesel Engines
- How to Replace (Z 16 XE the Throttle Valve Module (With AC, Lhd))
- How to Replace (Z 16 XE the Injectors (With AC, Lhd))
- How to Replace (Z 16 XE the Intake Air Temperature Sensor (With AC, Lhd))
- How to Check (Z 16 XE the Fuel Pressure (With AC, Lhd))
- How to Replace (Z 16 XE the Oxygen Sensor - Mixture Regulation (With AC, Lhd))
- How to Replace (Z 16 XE the Oxygen Sensor, Catalyst Control (With AC, Lhd))
- How to Replace (Z 16 XE the Dis Ignition Module (With AC, Lhd))
- How to Replace (Z 16 XE the Intake Pipe Pressure Sensor (With AC, Lhd))
- How to Replace (Z 16 XE the Camshaft Sensor (AC, Lhd))
- How to Replace (Z 16 XE the Crankshaft Sensor (With AC, Lhd))
- How to Replace (Z 16 XE the Coolant Temperature Sensor (With AC, Lhd))
- How to Replace (Z 16 XE the Knock Sensor (With AC, Lhd))
- How to Remove and Install (Z 16 XE the Engine Control Unit (With AC, Lhd))
- How to Check (Z 16 XE) the Pedal Sensor
- Engine Management
- How to Replace (Z 18 XE the Throttle Valve Module (Z 18 XEL, with AC, Lhd))
- How to Replace (Z 18 XE the Injectors (Z 18 XEL, with AC, Lhd))
- How to Replace the Oxygen Sensor - Mixture Regulation
- How to Replace (Z 18 XE the Oxygen Sensor - Catalytic Converter Control (Z 18 XEL, with AC, Lhd))
- How to Replace (Z 18 XE the Dis Ignition Module (Z 18 XEL, with AC, Lhd))
- How to Replace (Z 18 XE the Crankshaft Sensor (Z 18 XEL, with AC, Lhd))
- How to Replace (Z 18 XE the Camshaft Sensor (Z 18 XEL, with AC, Lhd))
- How to Replace (Z 18 XE the Knock Sensor (Z 18 XEL, with AC, Lhd))
- How to Replace (Z 18 XE the Hot Film Mass Air Flow Meter (Z 18 XEL))
- How to Replace (Z 18 XE the Coolant Temperature Sensor (Z 18 XEL, with AC, Lhd))
- How to Remove and Install (Z 18 XE the Engine Control Unit (Z 18 XEL, with AC, Lhd))
- How to Replace (Z 18 XE the Pedal Sensor (Z 18 XEL))
- Engine - Stalling
- Coolant Temperature Sensor - Wiring Harness Connector Poor Contact
- How to Replace (Z 32 SE the Crankshaft Pulse Pickup (With AC, Lhd))
- How to Replace (Z 32 SE the Throttle Valve Module (With AC, Lhd))
- How to Replace (Z 32 SE the Switchover Valves (With AC, Rhd))
- How to Replace (Z 32 SE the Solenoid Valve - Intake Plenum Switchover Valve (With AC, Lhd))
- How to Remove and Install (Z 32 SE the Pressure Relief Valve - Intake Manifold (With AC, Rhd))
- How to Replace (Cylinder 1-3-5) (Z 32 SE the Knock Sensor (With AC, Lhd))
- How to Replace (Cylinder 2-4-6) (Z 32 SE the Knock Sensor (With AC, Rhd))
- How to Replace (Z 32 SE the Camshaft Sensor (With AC, Rhd))
- How to Replace (1 or All Injectors) (Z 32 SE the Injectors (With AC, Lhd))
- How to Replace (Z 32 SE the Oxygen Sensor - Mixture Regulation (For Cylinders 1-3-5) (With AC, Lhd))
- How to Replace (Z 32 SE the Oxygen Sensor - Mixture Regulation (For Cylinders 2-4-6) (With AC, Lhd))
- How to Replace (Z 32 SE the Oxygen Sensor - Catalytic Converter Control (For Cylinders 1-3-5) (With AC, Lhd))
- How to Replace (Z 32 SE the Oxygen Sensor - Catalytic Converter Control (For Cylinders 2-4-6) (With AC, Lhd))
- How to Replace (Z 32 SE the Dis Ignition Module/ignition Coil (With AC, Lhd))
- How to Replace (Z 32 SE the Hot Film Mass Air Flow Meter (With AC, Lhd))
- How to Replace (Z 32 SE the Coolant Temperature Sensor (With AC, Lhd))
- Engine - Power Decrease Under Load
- How to Remove and Install (Z 32 SE) the Engine Control Unit
- How to Replace (Z 16 XE the Pedal Sensor (Z 18 XE, Z 22 SE, Z 32 SE, Y 20 DTH, Y 22 DTR))
- Cylinder Head - Programming Option "Old" and "New" Cylinder Head
- Engine - Car Cannot Be Started
- How to Replace (Z 22 SE the Throttle Valve Module (AC, Rhd, At))
- How to Replace (1 or All Injectors) (Z 22 SE the Injectors (AC, Rhd, At))
- How to Check (Z 22 SE the Fuel Pressure (With AC, Rhd))
- How to Replace (Z 22 SE the Oxygen Sensor - Mixture Regulation (AC, Rhd, At))
- How to Replace (Z 22 SE the Oxygen Sensor -Catalytic Converter Control (AC, Rhd, At))
- How to Replace (Z 22 SE the Dis Ignition Module (AC, Rhd, At))
- Crankshaft Sensor - MIL On, P0335 Set
- How to Replace (Z 22 SE the Pressure Sensor - Intake Pipe (AC, Rhd, At))
- How to Replace (Z 22 SE the Pulse Pickup - Crankshaft (AC, Rhd, At))
- How to Replace (Z 22 SE the Knock Sensor (AC, Rhd, At))
- Sensor, (Coolant Temperature, Replace (Z 22 SE, AC, Rhd, At))
- How to Replace (Z 22 SE the Hot Film Mass Air Flow Meter (AC, Rhd, At))
- Engine - Bad Cold Start Behaviour
- How to Remove and Install (Z 22 SE the Engine Control Unit (AC, Rhd, At))
- How to Replace (Z 22 SE the Pedal Sensor (With AC, Rhd))
- Engine Z22YH, High-Pressure Pump, Fuel Pressure Regulator (Defective (P1191 Set)pф=)
- Z22SE Engine - Wrong Oil Level Indication on Oil Dipstick
- Common Rail Engines - Bad Idle, Lack of Power After ECU or Injector Replacement
- How to Replace (Y 20 DTH the Diesel Fuel Injection Lines (Y 22 DTR) Note: Replace as a Set)
- How to Replace (Y 22 DTR the Traverse - Injection Nozzles (With AC, Rhd))
- How to Replace (Y 22 DTR the Injection Nozzles (With AC, Rhd))
- How to Replace (Replace Engine Control Unit) the Diesel Fuel Injection Pump
- How to Replace (Y 22 DTR the Sensor - Coolant Temperature (With AC, Rhd))
- How to Replace (Y 22 DTR the Intake Pipe Pressure Sensor (With AC, Lhd))
- How to Replace (Y 20 DTH the Air Pressure Sensor (Y 22 DTR, with Air Conditioning, Lhd))
- How to Replace (Y 22 DTR the Hot Film Mass Air Flow Meter (With AC, Lhd))
- How to Replace (Y 22 DTR the Solenoid Valve - Charge Pressure Regulation (With AC, Lhd))
- Engine Z22SE, Z22YH (High Oil Consumption)
- Engine Z22YH - Failure Code P1606 (38), P1550 (03) Is Set
- Y30DT Engine - Engine Stalls During Drive off And/or A/c Compressor Shut off at High Load Conditions
- Engine Z22YH - Battery Charge Indicator Lamp Flashes, Failure Code P0621(04) Set
- Engine Y20DTH / Y22DTR - Electrical EGR Valve Malfunction, DTC P400(C) And/or P0400(9) Is Set
- Engine Z19DT / Z19DTH - Poor Drivability, Steering Wheel Vibrations During DPF Regeneration Phase
- Engine Z22SE - High Oil Consumption
- Engine Y22DTR - Jerking Between 1750 and 2200 RPM
- Engine Z19DT/Z19DTH - Oil Level Indicator Comes Up Too Early
- ECU - Svs Telltale on During Ignition On, DTC P0070 (71) And/or P1811 (72) Set
- Engine Does Not Start - DTC P0606 (37) Set in Engine ECU, Engine Does Not Start.
- Y30DT Engine - Starter Meshes into Ring Gear
- Y30DT Engine - Oscillating Intake Air Flow Noise
- Engine Y30DT, Air Cleaner Element (Turbo Charger Damaged Due to Over Speed)
- Engine Y30DT with Automatic Transmission - Jerking at Constant Speed Driving or Slight Tip in of Accelerator Pedal Between 1200 - 1700 RPM
- Engine Y22DTR, Turbocharger (DTC P0234 (5A) Set During Acceleration)
- Engine Y30DT, ECU (Blocked Ventilation Hole Causing DTC P0105(52))
- Engine Y22DTR - Turbocharger Calibration
- Engine Z19DTH, Swirl Flap Actuator (Posibility for DTC P1109)
- Engine Y30DT, High Pressure Pump (Lack of Power During Acceleration)
- Engine Z30DT, Idler Pulley (Noise from Ribbed-V-Belt Area)
- Engine Z22YH - Rattling Noise from Engine at Idle
- Engine Z18XER: Airflow Meter - Driveability Complaints, MIL On, Trouble Code P0100 Set, Deactivation of ESP
- Engine Z30DT, EGR Valve (Jerking/stalling, Loss of Power Trouble Code P0409 (63) Set)
- Engine Z18XER - Different Driveability Complaints, DTC P0601 (30) Set
- Engine Z32SE - Engine Does Not Start Sometimes, DTC P1612, P1613, P1616 in ECU Set
- Engine Z16/18XER - Trouble Code P0136(02), P0130(02) And/or P0170(12) Is Set
- Engine Z19DTH/J, Rail Pressure Sensor (Engine Stalls, Trouble Code P0190 (07) Set)
- Engine Z19DT/Z19DTL - Jerking in Certain RPM Range
- Engine Z30DT, Boost Pressure Sensor (Bad Connection to Engine Wiring Harness)
- Engine Z22YH - Engine Malfunction Controllamp Illuminates, Trouble Code P1112 (64) Stored
- Engine Z19DT/H/L - No Communication with ECU
- Engine Z19DT/L/H - Svs On, Trouble Code P2452(58), DPF Sensor Hose Malfunction Set
- Engine Z19DT/H/L - Changed Characteristic After Sps Programming with Tis 2000-DVD, Version 83
- Engine Z17/19DTx, Cylinder Balance Test (Rugh Idle, Engine Cuts Out)
- Engine Z16/18XER - No Start, Somtimes TC P0340 or P0365 Set
- Engine Z16XE1/XEP/XER/LEL/LET/LER, Z18XER (Oil Leakage Crankshaft Sealing Ring)
- Fit Coolant Temperature Sensor (Z 20 NET, AC, Rhd, Mt)
- Replace Throttle Valve Module (Z 20 NET, AC, Rhd, Mt)
- Replace Injector (1 Injector or All) (Z 20 NET, AC, Rhd, Mt)
- Replace Mixture Control Oxygen Sensor (Z 20 NET, AC, Rhd, Mt)
- Replace Catalytic Converter Control Oxygen Sensor (Z 20 NET, AC, Rhd, Mt)
- Replace Ignition Coil (Z 20 NET, AC, Rhd, Mt)
- Replace Crankshaft Pulse Emitter (Z 20 NET, AC, Rhd, Mt)
- Remove and Refit Engine Control Unit (Z 20 NET, AC, Rhd, Mt)
- Replace Fuel Pressure Regulator (Z 20 NET, AC, Rhd, Mt)
- Replace Hot Film Air Mass Meter (Z 20 NET, AC, Rhd, Mt)
- Replace Sensor, Charge Air Temperature/pressure (Z 20 NET, AC, Rhd, Mt)
- Replace Ignition Monitoring Module (Z 20 NET, AC, Rhd, Mt)
- Replace Solenoid Turbo Bypass Air Control (Z 20 NET, AC, Rhd, Mt)
- How to Replace (Z 20 NET the Sensor, Exhaust Temperature (Up to Model Year 04.5))
- Engine Z16/18XE1/P/R, Thermostat (MIL On, Trouble Code P0115 Is Stored)
- Replace Pedal Sensor (Z 20 NET with A/c, Rhd)
- Engine Z19DT/L, Agr Valve (Trouble Code P0400 (5A) Is Set)
- Engine A/Z/16/18XER - Rattling Noise Sometimes P0011 or P0014 Stored, Svs On
- Replace Throttle Module (Z 22 YH, Lhd, AC)
- Check Fuel Pressure (Z 22 YH, Lhd, AC)
- How to Replace (Z 22 YH the Oxygen Sensor - Mixture Regulation (AC, Rhd, At))
- Engine Management System Edc C39 - Engine Stalls, DTC: P0606 Set
- Replace Dis Ignition Module (Z 22 YH, Lhd, AC)
- Replace Intake Manifold Pressure Sensor (Z 22 YH, Lhd, AC)
- How to Replace (Z 22 YH the Pulse Pickup - Crankshaft (AC, Rhd, At))
- How to Replace (Z 22 YH the Knock Sensor (AC, Rhd, At))
- Sensor, (Coolant Temperature, Replace (Z 22 YH, AC, Rhd, At))
- How to Replace (Z 22 YH the Hot Film Air Mass Meter (AC, Rhd, At))
- Remove and Refit High Pressure Fuel Sensor (Z 22 YH, AC, Lhd, At)
- Remove and Refit High Pressure Fuel Regulator (Z 22 YH, AC, Lhd, At)
- How to Replace (Z 22 YH the Pedal Sensor (With AC, Rhd))
- How to Replace (Y 30 DT the Throttle Valve Module (With Air Conditioning, Lhd))
- Engine Z16XEP - Poor Performance, MIL Illuminates, P0171 Fuel Trim System Lean Set.
- How to Replace (Y 30 DT the High Pressure Pump (With Air Conditioning, Lhd))
- How to Replace the Fuel Rail (Injection System Pressure Reservoir)
- How to Replace (Pressure Reservoir the All Pressure Lines (Injection Lines) (Injector))
- How to Replace (Y 30 DT the Injectors-Cylinder-1-3-5 (With Air Conditioning, Lhd))
- How to Replace (Y 30 DT the Injectors - Cylinder-2-4-6 (With Air Conditioning, Lhd))
- How to Replace (Y 30 DT the Crankshaft Pulse Pickup (Rhd, with Air Conditioning))
- How to Replace (Y 30 DT the Mass Air Flow Meter (With Air Conditioning, Rhd))
- How to Replace (Y 30 DT) the Pedal Sensor
- Replace Injectors (Z 22 YH, Lhd, AC)
- How to Replace (Y 30 DT the High Pressure Pump Spur Gear (With Air Conditioning, Lhd))
- Replace Coolant Temperature Sensor (Y 30 DT, Rhd, with Air Conditioning)
- Replace Intake Air/charge Air Temperature Sensor (Y 30 DT, Rhd, with Air Conditioning)
- Replace Charge Air Sensor (Y 30 DT, Rhd, with Air Conditioning)
- Replace Fuel Temperature Sensor (Y 30 DT, Rhd, with Air Conditioning)
- Replace Oil Temperature Sensor (Y 30 DT, Rhd, with Air Conditioning)
- Replace Camshaft Sensor (Y 30 DT, Rhd, with Air Conditioning)
- How to Remove and Install (Y 30 DT the Control Unit, Fuel Injection System (Rhd, with Air Conditioning))
- Replace Vacuum Reservoir (Y 30 DT, Rhd, with Air Conditioning)
- Replace Throttle Valve Solenoid Valve (Y 30 DT, Rhd, with Air Conditioning)
- How to Replace (Y 30 DT the Heating System Control Unit (Rhd, with Air Conditioning))
- Replace Injection System Pressure Regulator (Y 30 DT)
- Replace Pressure Chamber Sensor (Y 30 DT)
- How to Remove (With KM-6360) (Z 22 YH the Injectors from Cylinder Head (Lhd, AC))
- How to Replace (Z 22 YH the Oxygen Sensor - Catalytic Converter Control (AC, Lhd, At))
- How to Remove and Install (Y 30 DT) the Air Cleaner Housing
- How to Replace (Y 30 DT) the Air Intake Pipe
- How to Replace (Y 30 DT the Resonator (With Air Conditioning, Rhd))
- How to Remove and Install (Z 19 DTH) the Air Cleaner Housing
- Replace an Injector
- How to Replace (Z 19 DTH) the Pressure Line (High-Pressure Pump Pressure Reservoir)
- How to Replace (Z 19 DTH) the All Pressure Lines (Fuel Rail - Injector)
- How to Replace (Z 19 DTH) the Oil Leak Line
- How to Replace (Z 19 DTH) the Fuel Rail (Pressure Reservoir)
- How to Replace (Z 19 DTH) the Crankshaft Pulse Pick-Up
- How to Replace (Z 19 DTH) the Camshaft Sensor
- How to Replace (Z 19 DTH) the Coolant Temperature Sensor
- How to Replace (Z 19 DTH) the Hot Film Mass Air Flow Meter
- How to Replace (Z 19 DTH) the Throttle Valve Module
- How to Replace (Z 19 DTH) the Charge Pressure Sensor
- How to Replace (Z 19 DTH) the Pedal Sensor
- Replace Coolant Temperature Sensor
- Engine Management (Z 19 DTH)
- How to Remove and Install (Z 19 DTH) the High Pressure Pump
- How to Replace (Z 19 DTH) the Fuel Return Damping Case
- How to Replace (Y 30 DT) the Heat Shield Sleeves
- How to Replace (Y 30 DT the Both Leaked Oil Lines (With AC, Lhd))
- Replace Cooling Module Control Unit
- Replace Charge Pressure Control Solenoid Valve
- How to Replace (Z 19 DTH) the Control Unit, Pre-Heating System
- How to Remove and Install the Pressure Regulating Valve
- Replace Rail Pressure Sensor
- How to Remove and Install the Changeover Flaps Actuator Drive
- Replace Particle Filter Temperature Sensor
- Replace Differential Pressure Sensor
- Replace Pre-Catalytic Converter Temperature Sensor
- Replace Oxygen Sensor
- Illustration of Air Ducts
- Remove and Install Air Cleaner Housing
- Replace Charge Air Pipe from Turbocharger to Intercooler
- Replace High Pressure Pump Spur Gear
- Replace High Pressure Pump
- Replace Fuel Line from High Pressure Pump to Pressure Reservoir
- Replace High Pressure Fuel Lines from Pressure Reservoir to Injectors
- Replace Pressure Reservoir
- Replace Injectors for Cylinders 1, 3 and 5
- Replace Injectors for Cylinders 2, 4 and 6
- Replace Both Oil Leak Lines
- Replace Crankshaft Pulse Pick-Up
- Replace Intake Air Temperature Sensor
- Replace Charge Air Sensor
- Replace Fuel Temperature Sensor
- How to Replace the Sensor - Oil Temperature
- Replace Hot Film Mass Air Flow Meter
- Replace Camshaft Sensor.
- Replace Switchover Valve Solenoid Valve
- Replace Pedal Travel Sensor
- Illustration of Engine Management
- Replace Knock Sensor for Cylinders 1, 3 and 5
- Replace Knock Sensor for Cylinders 2, 4 and 6
- Replace Camshaft Sensor for Cylinders 1, 3 and 5
- Replace Camshaft Sensor for Cylinders 2, 4 and 6
- Replace Injection Valves
- Replace Mixture Regulation Oxygen Sensor
- Replace Catalytic Converter Control Oxygen Sensor
- Replace Ignition Modules of Cylinders 1, 3 and 5
- Replace Ignition Modules of Cylinders 2, 4 and 6
- Replace Mass Air Flow Meter
- Remove and Install Engine Control Unit
- Replace Actuator, Intake Camshaft for Cylinder 1-3-5
- Replace Actuator, Intake Camshaft for Cylinder 2-4-6
- Replace Oil Pressure Sensor
- Replace Charge Pressure Sensor
- Replace Crankshaft Sensor
- Replace Accelerator Pedal Module
- How to Replace the Throttle Valve Module
- Illustration of Common Rail
- Remove and Install Alternator Bracket
- Remove and Install Injectors
- Replace Ignition Module
- Replace Camshaft Sensors.
- Replace Knock Sensor
- Remove and Install Drive Pedal Module
- Remove and Install Spark Plugs
- How to Remove and Install the Tank Vent Valve
- Replace Actuator Exhaust Camshaft for Cylinders 1-3-5 (Z28NET as of MY 2007)
- Actuator, Exhaust Camshaft for Cylinders 2-4-6 (Z28NET as of MY 2007)
- ABS
- ABS 5.3
- ABS 5.3/TC/ESP
- ABS 5/TC, ABS 5.3/TC
- ABS Mk20i
- Air Conditioning
- Airbag
- Anti-Theft Warning System-M
- Automatic Transmission Front Wheel Drive
- Battery
- Board Computer
- Body Equipment
- Brake Hydraulics, Brake Lines
- Brakes
- CAN Bus
- Car Level Control
- Central Door Locking System
- Central Locking with Atws (Electronic)
- Check Control
- Clutch
- Clutch and Transmission
- Communication / Navigation
- Connector pinouts
- Continuously Variable Transmission (Cvt) Front Drive
- Cooling System
- Corrosion Protection
- Diesel Engine
- DOHC Diesel Engine
- DOHC Petrol Engine
- Ecc Electronic Climate Control
- Ehps - Electrical Hydraulic Power Steering
- Electrical Equipment and Instruments
- Electrical Socket Front/ Rear
- Electrical Window Winders
- Electronic Cruise Control
- Electronic Module
- Electronic Ride Control
- Engine and Engine Aggregates
- Engine Electrics
- Eps Electrical Power Steering
- Exhaust System
- Fittings, Hinges, Locks
- Frame
- Front End
- Front Wheel Brake
- Front Wheel Suspension
- Front Wheel Suspension, Wheels and Tyres
- Fuel and Exhaust System
- Fuel Injection Systems
- Fuel System
- Fuse Box
- General Vehicle Information
- Glass, Window Guides, Window Winders
- Glassfibre Parts (Bolted)
- Graphic Info Display
- Headlamps, Lamps and Horn
- Heating, Ventilation
- Heating, Ventilation, Air Conditioning (HVAC)
- Immobiliser
- Instruments, Telltales
- Maintenance, Body and Chassis Sheet Metal Parts, Frame
- Manual Transmission Front Wheel Drive
- Manual Transmission Rear Wheel Drive
- Mid (Multi Info Display)
- Other Accessories
- Outside Rear View Mirror
- Paint
- Painting Repair Operations
- Painting Repair System
- Parkpilot
- Power Steering
- Radiator Grille
- Radio
- Rear Axle and Rear Wheel Suspension
- Rear Axle Front Wheel Drive
- Rear Wheel Brake
- Roof Luggage Carrier (Railing)
- Sac Semi Automatic Climate Control
- Seat Heating Systems
- Seats, Upholstery, Inner Trim Panels
- Service Brake, Parking Brake
- Servo Motors
- Sheet Metal Parts (Bolted)
- Sheet Metal Parts (Cement and Seal)
- Sheet Metal Parts (Welded)
- Sliding Roof
- Special Service Tools
- Steering
- Steering Gear
- Steering Linkage
- Steering Wheel - Steering Column
- Switches
- Switches, Control Unit, Relays, Ignition Lock
- TID (Triple Info Display)
- Trailer Hitch
- Trim Panels, Radiator Grille, Spoiler
- Trim Strips, Lettering, Coverings
- Turbo-Charging
- Wheels and Tyres
- Windscreen Wash/wipe System, Heated Screen
- Wiring Harnesses
- Xenon Control Unit (Headlamp Range Control)